Related papers: 5G or Wi-Fi for HA/DR in the 60 GHz Band?
Communications at frequencies above 10 GHz (the mmWave band) are expected to play a major role for the next generation of cellular networks (5G), because of the potential multi-gigabit, ultra-low latency performance of this technology.…
Proponents of deploying LTE in the 5 GHz band for providing additional cellular network capacity have claimed that LTE would be a better neighbour to Wi-Fi in the unlicensed band, than Wi-Fi is to itself. On the other side of the debate,…
License-assisted access (LAA) is a promising technology to offload dramatically increasing cellular traffic to unlicensed bands. Challenges arise from the provision of quality-of-service (QoS) and the quantification of capacity, due to the…
Coexistence between radar and outdoor Wireless Fidelity (Wi-Fi) needs thorough study since the IEEE 802.11 Working Group (WG) opposed the latest rules in 3550-3700 MHz (the 3.5 GHz band) that require "exclusion zones." This letter proposes…
Wireless Gigabit (WiGig) access points (APs) using 60 GHz unlicensed frequency band are considered as key enablers for future Gbps WLANs. Due to its short range transmission with high susceptibility to path blocking, a multiple number of…
Almost all the WiFi networks today provide single band (either 2.4 GHz or 5.8 GHz) wireless communication functionality for connected mobile nodes. In a single band network, the interference depends on number of nodes in the network and the…
The fifth-generation (5G) and beyond networks are designed to efficiently utilize the spectrum resources to meet various quality of service (QoS) requirements. The unlicensed frequency bands used by WiFi are mainly deployed for indoor…
Future sixth-generation of wireless system is expected to provide data-rates in the order of 1 Tbps and latencies below 1 ms. Among others, one of the most promising strategies to meet these requirements is to operate at higher frequencies…
For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This…
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are…
Future networks will pave the way for a myriad of applications with different requirements and Wi-Fi will play an important role in local area networks. This is why network slicing is proposed by 5G networks, allowing to offer multiple…
The full future of the sixth generation will develop a fully data-driven that provide terabit rate per second, and adopt an average of 1000+ massive number of connections per person in 10 years 2030 virtually instantaneously. Data-driven…
In December 2019, the 3GPP defined the road-map for Release-17, which includes new features on the operation of New Radio (NR) in millimeter-wave bands with highly directional communications systems, i.e., up to 52.6 GHz. In this paper, a…
The 5th wireless communication (5G) techniques not only fulfil the requirement of $1,000$ times increase of internet traffic in the next decade, but also offer the underlying technologies to the entire industry and ecology for internet of…
Technology forecasts anticipate a new era in which massive numbers of humans, machines, and things are connected to wireless networks to sense, process, act, and communicate with the surrounding environment in a real-time manner. To make…
By all measures, wireless networking has seen explosive growth over the past decade. Fourth Generation Long Term Evolution (4G LTE) cellular technology has increased the bandwidth available for smartphones, in essence, delivering broadband…
Internet of Things is one of the most promising technology of the fifth-generation (5G) mobile broadband systems. Data-driven wireless services of 5G systems require unprecedented capacity and availability. The millimeter-wave based…
The upper midband, spanning 7 to 24 GHz, strikes a good balance between large bandwidths and favorable propagation environments for future 6th Generation (6G) networks. Wireless networks in the upper midband, however, will need to share the…
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral…
The demand for broadband wireless access is driving research and standardization of 5G and beyond-5G wireless systems. In this paper, we aim to identify emerging security challenges for these wireless systems and pose multiple research…