Related papers: Detective quantum efficiency of photon-counting Cd…
We consider the use of single-photon counting detectors in coherence-domain imaging. Detectors operated in this mode exhibit reduced noise, which leads to increased sensitivity for weak light sources and weakly reflecting samples. In…
Single-photon detectors are an essential part of the toolbox of modern quantum optics for implementing quantum technologies and enabling tests of fundamental physics. The low energy of microwave photons, the natural signal path for…
We present the first evaluation of a recently developed silicon-strip detector for photon-counting dual-energy breast tomosynthesis. The detector is well suited for tomosynthesis with high dose efficiency and intrinsic scatter rejection. A…
CdZnTe-based detectors are highly valued because of their high spectral resolution, which is an essential feature for nuclear medical imaging. However, this resolution is compromised when there are substantial defects in the CdZnTe…
The soft X-ray imager (SXI) on the SMILE mission uses two large 4510x4510 back illuminated CCD370s to detect X-rays in the 0.2-2 keV range. These devices take heritage from the optical imaging PLATO mission CCD270s and have been optimised…
Over the last decade one of the most significant technological advances made in the field of radiation detectors for nuclear medicine was the development of Silicon Photomultipler (SiPM) sensors. At present a only small number of SiPM based…
In this paper the efficiency of direct charged particle detection with different Silicon PhotoMultiplier (SiPM) sensors has been measured to be close to 100%. Time resolution of about 20 ps has also been confirmed for sensors with an active…
Scintillators convert X-ray energy into visible or near-visible photons, enabling applications in high-energy particle detection and X-ray imaging. Increasing scintillator thickness improves X-ray absorption but degrades spatial resolution…
Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit…
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point,…
A novel concept to enhance the photo-detection efficiency (PDE) of silicon photomultipliers (SiPMs) has been applied and remarkable positive results can be reported. This concept uses arrays of microlenses to cover every second SiPM pixel…
An important question when developing photon-counting detectors for computed tomography is how to select energy thresholds. In this work thresholds are optimized by maximizing signal-difference-to-noise ratio squared (SDNR2) in an optimally…
We propose a new strip configuration for CdTe X-ray detectors, named "Wide-gap CdTe strip detector", in which the gap between adjacent strips is much wider than the width of each strip. It has been known that the observed energies of an…
We present the tests performed by the SIDDHARTA-2 collaboration at the DA{\Phi}NE collider with a quasi-hemispherical CdZnTe detector. The very good room-temperature energy resolution and efficiency in a wide energy range show that this…
Electron tracking based Compton imaging is a key technique to improve the sensitivity of Compton cameras by measuring the initial direction of recoiled electrons. To realize this technique in semiconductor Compton cameras, we propose a new…
With increasing interest in high-speed imaging should come an increased interest in the response times of our scanning transmission electron microscope (STEM) detectors. Previous works have previously highlighted and contrasted performance…
The performance of cesium iodide as a reflective photocathode is presented. The absolute quantum efficiency of a 500 nm thick film of cesium iodide has been measured in the wavelength range 150 nm to 200 nm. The optical absorbance has been…
Superconducting Tunnel Junctions (STJ's) are currently being developed as photon detectors for a wide range of applications. Interest comes from their ability to cumulate photon counting with chromaticity (i.e. energy resolution) from the…
We propose a scheme for infrared single-photon detection based on two-photon absorption at room-temperature in Si avalanche photodiodes, where the detected photon's energy is lower than the bandgap and the energy difference is complemented…
Transition edge sensors (TESs) are superconducting energy-resolving microcalorimeters that have demonstrated low background rates as well as quantum efficiencies close to unity for photons at optical and near-infrared wavelengths. This…