Related papers: Low-PMEPR Preamble Sequence Design for Dynamic Spe…
We consider the issue of high peak-to-average-power ratio (PAPR) of Orthogonal time frequency space (OTFS) modulated signals. This paper proposes a low-complexity novel iterative PAPR reduction method which achieves a PAPR reduction of…
Dynamic metasurface antennas (DMA) provide low-power beamforming through reconfigurable radiative slots. Each slot has a tunable component that consumes low power compared to typical analog components like phase shifters. This makes DMAs a…
Orthogonal time frequency space (OTFS) modulation has been proposed recently as a new waveform in the context of doubly-selective multi-path channels. This article proposes a novel pilot design that improves OTFS spectral efficiency (SE)…
In this paper, preamble-based least squares (LS) channel estimation in OFDM systems of the QAM and offset QAM (OQAM) types is considered, in both the frequency and the time domains. The construction of optimal (in the mean squared error…
To cope with the ever increasing demand for bandwidth, future wireless networks will be designed with reuse distance equal to one. This scenario requires the implementation of techniques able to manage the strong multiple access…
Low peak-to-average-power ratio (PAPR) transmissions significantly improve the cell coverage as they enable high power transmissions without saturating the power amplifier. A new modulation scheme, namely, pi/2-BPSK was introduced in the…
In this article we research about underwater acoustics transceivers. As Underwater acoustic transceivers consume more power than Radio frequency transceivers. The techniques which are being utilized in radio frequency cannot be implemented…
A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM)…
Dynamic metasurface antennas (DMAs) beamform through low-powered components that enable reconfiguration of each radiating element. Previous research on a single-user multiple-input-single-output (MISO) system with a dynamic metasurface…
Orthogonal Frequency Division Multiple Access (OFDMA) is a multi-user version of the Orthogonal Frequency Division Multiplexing (OFDM) transmission technique, which divides a wideband channel into a number of orthogonal narrowband…
In this study, we propose a differentiable layer for OFDM-based autoencoders (OFDM-AEs) to avoid high instantaneous power without regularizing the cost function used during the training. The proposed approach relies on the manipulation of…
Orthogonal Frequency Division Multiplexing (OFDM) systems have been widely used as a communication system. In OFDM systems, there are two main problems. One of them is that OFDM signals have high Peak-to-Average Power Ratio (PAPR). The…
As highlighted in the National Spectrum Strategy, Dynamic Spectrum Access (DSA) is key for enabling 6G networks to meet the increasing demand for spectrum from various, heterogeneous emerging applications. In this paper, we consider…
Antenna arrays have many applications in direction-of-arrival (DOA) estimation. Sparse arrays such as nested arrays, super nested arrays, and coprime arrays have large degrees of freedom (DOFs). They can estimate large number of sources…
In this paper, we consider distributive subband, power and rate allocation for a two-hop transmission in an orthogonal frequency-division multiple-access (OFDMA) cellular system with fixed relays which operate in decode-and-forward…
Multiple Input Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) is a promising transmission scheme for high performance broadband wireless communications. However, this technique suffers from a major drawback which…
Most of the recent power line communication (PLC) systems and standards, both narrow-band and broadband, are based on orthogonal frequency-division multiplexing (OFDM). This multiplexing scheme however suffers from the high peak-to-average…
Massive machine type communication (mMTC) has been identified as an important use case in Beyond 5G networks and future massive Internet of Things (IoT). However, for the massive multiple access in mMTC, there is a serious access preamble…
Driven by mission-critical applications in modern industrial systems, the 5th generation (5G) communication system is expected to provide ultra-reliable low-latency communications (URLLC) services to meet the quality of service (QoS)…
With the emergence of new applications (e.g., extended reality and haptics), which require to be simultaneously served not just with low latency and sufficient reliability, but also with high spectral efficiency, future networks (i.e., 6G)…