Related papers: Low-loss, high-bandwidth fiber-to-chip coupling us…
The efficiency of evanescent coupling between a silica optical fiber taper and a silicon photonic crystal waveguide is studied. A high reflectivity mirror on the end of the photonic crystal waveguide is used to recollect, in the backwards…
We report a mid-infrared ring laser via fiber-to-waveguide hybrid integration enabled by directional couplers fabricated in fluoride glasses. Directional couplers were inscribed into fluoride glass using femtosecond laser direct writing,…
Reducing the fabrication cost of photonic integrated circuits while maintaining low optical losses and technological simplicity is essential for their wider implementation. In conventional manufacturing methods, the dielectric cladding…
Highly efficient coupling of photons from nanoemitters into single-mode optical fibers is demonstrated using tapered fibers. 7.4 +/- 1.2 % of the total emitted photons from single CdSe/ZnS nanocrystals were coupled into a 300-nm-diameter…
Experimental evidence of mode-selective evanescent power coupling at telecommunication frequencies with efficiencies up to 75 % from a tapered optical fiber to a carefully designed metal nanoparticle plasmon waveguide is presented. The…
Silicon photonic devices are poised to enter high volume markets such as data-communications, telecommunications, biological sensing, and optical phased arrays; however, permanently attaching a fiber to the photonic chip with high optical…
We propose a practical and efficient solution for the coupling of light from integrated single-mode waveguides to supercollimating planar photonic crystals on conventional silicon-on-insulator platforms. The device consists of a rib…
The third-order optical nonlinearity in optical waveguides has found applications in optical switching, optical wavelength conversion, optical frequency comb generation, and ultrafast optical signal processing. The development of an…
2x2 couplers are crucial in many photonics applications but are often wavelength-sensitive. Alternative designs could be large, complex, or lossy. We present a broadband ultra-compact adiabatic coupler with minimal coupling variation and…
Fiber-to-chip couplers play a crucial role in interfacing on-chip photonic circuits with other optical systems or off-chip devices. Downsizing the couplers via topology optimization addresses the demand for high-density integration and…
We report on the experimental demonstration of the broadband "trapped rainbow" in the visible range using arrays of adiabatically tapered optical nano waveguides. Being a distinct case of the slow light phenomenon, the trapped rainbow…
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the…
As photon mixing is not inherently limited to any specific spectral region, parametric processes represent a compelling solution for all-optical signal processing in spectral windows not easily accessible by other technologies.…
Optical amplification is critical for optical signal transmission. While the emergence of erbium-doped fiber amplifiers has revolutionized optical communications in fiber-based systems, on-chip amplification remains essential for integrated…
We report single-mode 3D optical couplers leveraging adiabatic power transfer towards up to 4 output ports. We use the CMOS compatible additive (3+1)D \emph{flash}-TPP printing for fast and scalable fabrication. Coupling optical losses of…
Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on…
Microring resonators enable the enhancement of nonlinear frequency mixing processes, generating output fields at frequencies that widely differ from the inputs, in some cases by more than an octave. The efficiency of such devices depends on…
Erbium-doped waveguide amplifiers have captured great attentions in recent years due to the rapid advance of photonic integration materials and fabrication techniques. In this work, a compact erbium-doped thin-film lithium niobate waveguide…
We report on systematic experimental mapping of the transmission properties of two-dimensional silicon-on-insulator photonic crystal waveguides for a broad range of hole radii, slab thicknesses and waveguide lengths for both TE and TM…
This paper reports on 3D-printed dielectric image lines for low-loss subTHz applications between 140 and 220 GHz. In contrast to conventional dielectric waveguides, a conductive copper substrate is used to achieve robust routing and…