Related papers: Al$_2$O$_3$-CaO macroporous ceramics containing hy…
Calcium aluminate cement (CAC), calcium carbonate (CaCO$_3$), calcium hydroxide [Ca(OH)$_2$] and calcium oxide (CaO) were investigated in alumina-based macroporous compositions for $\textit{in situ}$ formation of hibonite (also known as…
The effect of sintering regimes on the density, microstructure parameters, and mechanical properties of Al2O3 and Al2O3 + 0.25%MgO ceramics has been investigated. The ceramics were sintered in three regimes: Regime I - heating at a constant…
Optical ceramics of yttrium aluminum garnet (Y3-xCaxAl4.95Cr0.05O12) doped with 0.1 at.% of chromium ions and 0.5, 0.8, and 1.2 at.% of calcium ions were prepared by reactive sintering in vacuum at 1750 degrees C. The influence of SiO2 and…
MAX phases have great potential under demands of both high-temperature and high-stress performance, with their mixed atomic bonding producing the temperature and oxidation resistance of ceramics with the mechanical resilience of metals.…
The present work describes a synthesis route for bulk Ta4AlC3 MAX phase ceramics with high phase purity. Pressure assisted densification was achieved by both hot pressing and spark plasma sintering of tantalum hydride, aluminium and carbon…
The efficiency of glass ceramic sealants plays a crucial role in high temperature applications performance and durability, such as oxygen separation from air. In order to develop suitable sealants, operating at about 950C, several…
The Laves phase skeleton in cast Mg-Al-Ca alloys is known to provide considerable strengthening. Laves phases such as CaMg$_2$ (C14), Ca(Al,Mg)$_2$ (C36), and CaAl2 (C15) have high melting points, high hardness at room and elevated…
The size-dependent phase stability of gamma-Al2O3 was studied by large-scale molecular dynamics simulations over a wide temperature range from 300 to 900 K. For the gamma-Al2O3 crystal, a bulk transformation to alpha-Al2O3 by an FCC-to-HCP…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
CaxCoO2 thin films can be promising for widespread flexible thermoelectric applications in a wide temperature range from room-temperature self-powered wearable applications (by harvesting power from body heat) to energy harvesting from hot…
We have grown La$_{0.3}$Sr$_{0.7}$CoO$_{3-{\delta}}$ thin films by pulsed laser deposition on (LaAlO$_3$)$_{0.3}$(Sr$_2$TaAlO$_3$)$_{0.7}$ substrates with and without a protective LaAlO$_3$ capping layer and investigated their structural…
Nanolaminated Al2O3/HfO2 thin films as well as single Al2O3 and HfO2 layers have been grown as gate dielectrics by Plasma Enhanced Atomic Layer Deposition (PEALD) technique on silicon carbide (4H-SiC) substrates. All the three dielectric…
Additively manufactured (AM) aluminum alloys with high strength and thermal stability have broad applications in turbine engines, vacuum pumps, heat exchangers, and many other industrial systems. Employing precipitates with an L1$_2$…
In this manuscript, we report room temperature structural, microstructural, optical, dielectric, and magnetic properties of CuO and Cu0.995La0.005 ceramics, synthesized by solid-state reaction method. La doping in CuO leads to the evolution…
The present study examines evaporative cooling and the resulting deposition patterns of a sessile $Al_2O_3$-based nanofluid droplet on a hydrophobic glass substrate at different temperatures. Evaporation predominantly occurs in the pinned…
The structural phase transition in hexagonal BaMnO$_3$ occurring at $T_c$=130 K was studied in ceramic samples using electron and X-ray diffraction, second harmonic generation as well as by dielectric and lattice dynamic spectroscopies. The…
The influence of chemical composition changes on the room temperature mechanical proper-ties in the C15 CaAl2 Laves phase were investigated in two off-stoichiometric compositions with 5.7 at.-% Mg addition (Ca33Al61Mg6) and 10.8 at.-% Mg…
Differential thermal analysis has been conducted for the Al-Cu-Co alloys with the composition range of 15 at.% Co and 10 to 30 at.% Cu, and 25 at.% Co and 2.5 to 20 at.% Co. The features of the formation of solid phases have been studied…
Plasma enhanced atomic layer deposition was used to deposit thin films of Ga2O3 on to c-plane sapphire substrates using triethylgallium and O2 plasma. The influence of substrate temperature and plasma processing parameters on the resultant…
An assumption on general regularities and chemical mechanisms of solid-state reactions in nanofilms and nanothermite mixtures is made. It is demonstrated that the moving force of all Al-based nanothermite reactions is the synthesis of the…