Related papers: Suppressed-gap millimetre wave kinetic inductance …
We measure the rectified dc currents resulting when a 3-terminal semiconductor device with gate-dependent conductance is driven with an ac gate voltage. The rectified currents exhibit surprisingly complex behaviour as the dc source-drain…
Whispering gallery mode (WGM) microcavities feature ultrahigh Q-factors and small mode volumes, offering strong light-matter interactions for sensing applications. However, unmodified surfaces are weakly responsive togas-phase refractive…
The complex conductivity of a superconducting thin film is related to the quasiparticle density, which depends on the physical temperature and can also be modified by external pair breaking with photons and phonons. This relationship forms…
Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate…
Microwave Kinetic Inductance Detector (MKID) arrays are currently being developed and deployed for astronomical applications in the visible and near infrared and for sub-millimetre astronomy. One of the main drawbacks of MKIDs is that large…
In this report, we present nanoelectromechanical resonators fabricated with thin exfoliated crystals of a high-T$_c$ cuprate superconductor Bi$_2$Sr$_2$Ca$_1$Cu$_2$O$_{8+\delta}$. The mechanical readout is performed by capacitively coupling…
Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the…
We performed a new series of systematic studies of gain and rate characteristics of several micropattern gaseous detectors. Extending earlier studies, these measurements were done at various pressures, gas mixtures, at a wide range of…
A Resistive Plate Chamber using Diamond-Like Carbon electrodes (DLC-RPC) has been developed as a background tagging detector in the MEG$~$II experiment. The DLC-RPC is planned to be installed in a high-intensity and low-momentum muon beam.…
We present low-temperature measurements of low-loss superconducting nanowire-embedded resonators in the low-power limit relevant for quantum circuits. The superconducting resonators are embedded with superconducting nanowires with widths…
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy…
All first-generation large-scale gravitational wave detectors are operated at the dark fringe and use a heterodyne readout employing radio frequency (RF) modulation-demodulation techniques. However, the experience in the currently running…
We present a new differential mechanical gradiometer for the detection of low-frequency Gravitational Waves. The frequency range is 0.05 to 1 Hz, a frequency gap not covered either by future space-based detectors such as LISA or by…
Accessing the intrinsic critical current density (Jc*) in type II superconductors has significant fundamental and technological potential, both as a probe of the microscopic superconducting properties and as a means to increase current…
To support millimeter wave (mmWave) frequency bands in cellular communications, both the base station and the mobile platform utilize large antenna arrays to steer narrow beams towards each other to compensate the path loss and improve…
We report the realization of a bonded-bridge on-chip superconducting coil and its use in impedance-matching a highly ohmic quantum dot (QD) to a $\rm{3~GHz}$ measurement setup. The coil, modeled as a lumped-element $LC$ resonator, is more…
Aluminum lumped-element kinetic inductance detectors (LEKIDs) sensitive to millimeter-wave photons have been shown to exhibit high quality factors, making them highly sensitive and multiplexable. The superconducting gap of aluminum limits…
We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of…
Single-photon detectors based on the superconducting transition-edge sensor are used in a number of visible to near-infrared applications, particularly for photon-number-resolving measurements in quantum information science. To be practical…
Because of their small size, low loss, and compatibility with magnetic fields and elevated temperatures, surface acoustic wave resonators hold significant potential as future quantum interconnects. Here, we design, fabricate, and…