Related papers: Large-area, high-NA Multi-level Diffractive Lens v…
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
We demonstrate an inverse designed achromatic, flat, polarization-insensitive diffractive optic element, i.e., multilevel diffractive lens (MDL), operating across a broadband range of UV light (250 nm - 400 nm) via numerical simulations.…
Recent theoretical work suggested upper bounds on the operating bandwidths of flat lenses. Here, we show how these bounds can be circumvented via a multi-level diffractive lens (MDL) of diameter = 100 mm, focal length = 200 mm, device…
It is generally assumed that correcting chromatic aberrations in imaging requires optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal…
We designed, fabricated and characterized a flat multi-level diffractive lens (MDL) comprised of only silicon with diameter = 15.2mm, focal length of 19mm, and operating over the longwave infrared (LWIR) spectrum of 8um to 14um. We…
Recently, there has been an explosion of interest in metalenses for imaging. The interest is primarily based on their sub-wavelength thicknesses. Diffractive lenses have been used as thin lenses since the late 19th century. Here, we show…
We designed and fabricated a flat multi-level diffractive lens (MDL) that is achromatic in the SWIR band (875nm to 1675nm). The MDL had a focal length of 25mm, aperture diameter of 8.93mm and thickness of only 2.6um. By pairing the MDL with…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we…
We demonstrate imaging over the visible band using a single planar diffractive lens. This is enabled via multi-level diffractive optics that is designed to focus over a broad wavelength range, which we refer to as an achromatic diffractive…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
The numerical aperture (NA) of a lens determines its ability to focus light and its resolving capability. Having a large NA is a very desirable quality for applications requiring small light-matter interaction volumes or large angular…
Flat optics consisting of nanostructures of high-refractive-index materials produce lenses with thin form factors that tend to operate only at specific wavelengths. Recent attempts to achieve achromatic lenses uncover a trade-off between…
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…
We experimentally demonstrate imaging in the longwave-infrared (LWIR) spectral band (8um to 12um) using a single polymer flat lens based upon multi-level diffractive optics. The device thickness is only 10{\mu}m, and chromatic aberrations…
We implemented the inverse design method to build a thin near-field lens that could produce a desired subwavelength focus by manipulating the near fields of a magnetic dipole source. The flat near-field lens represented by an artificial…
We design, fabricate, and characterize multifunctional and compact diffractive microlenses with sub-wavelength thickness and the capability to simultaneously focus visible and near-infrared spectral bands at two different focal positions…
Micro lens array is crucial in various kinds of optical and electronic applications. A micro lens array with high numerical aperture (NA) and low aberration is in particular needed. This research is aimed to design and fabricate such a…
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio…