Related papers: Measuring the Etalon Quality of the GREGOR Fabry-P…
The solenoid scan is one of the most common methods for the in-situ measurement of the thermal emittance of a photocathode in an rf photoinjector. The fringe field of the solenoid overlaps with the gun rf field in quite a number of…
The IAG solar observatory is producing high-fidelity, ultra-high-resolution spectra (R>500000) of the spatially resolved surface of the Sun using a Fourier Transform spectrometer (FTS). The radial velocity (RV) calibration of these spectra…
Einstein Telescope (ET) is expected to achieve sensitivity improvements exceeding an order of magnitude compared to current gravitational-wave detectors. The rigorous characterization in optical birefringence of materials and coatings has…
(Abridged): We define and test a new technique to accurately measure the cavity defects of air-spaced FPIs, including distortions due to the spectral tuning process typical of astronomical observations. We further develop a correction…
The Spectro-Polarimeter (SP) is a new instrument installed at the upgraded Andrei B. Severny Solar Tower Telescope (STT) at the Crimean Astrophysical Observatory. The instrument is a traditional echelle slit dual-beam spectropolarimeter…
We present the novel design of microfabricated, silicon-substrate based mirrors for use in cryogenic Fabry-Perot Interferometers (FPIs) for the mid-IR to sub-mm/mm wavelength regime. One side of the silicon substrate will have a…
The Scanning electron microscope (SEM) and Electron-Dispersive Spectroscope (EDS) are two highly effective instruments in the field of nanoscience and nanotechnology. The quality of these instruments is determined by various factors, with…
Focal ratio degradation (FRD) is a major contributor to throughput and light loss in a fibre spectroscopic telescope system. We combine the guided mode theory in geometric optics and a well-known model, power distribution model (PDM), to…
Fourier transform spectroscopy (FTS) has been widely used as an analytical tool for many applications in science and engineering. In this paper, we describe the operation principle and practical implementation of an FTS prototype. First,…
We report on the construction and testing of a vacuum-gap Fabry-P\'erot etalon calibrator for high precision radial velocity spectrographs. Our etalon is traced against a rubidium frequency standard to provide a cost effective, yet…
The Gemini Planet Imager (GPI) is a high-contrast imaging instrument designed to directly image and characterize exoplanets. GPI is currently undergoing several upgrades to improve performance. In this paper, we discuss the upgrades to the…
ESO's two FOcal Reducer and low dispersion Spectrographs (FORS) are the primary imaging cameras for the VLT. Since they are not direct-imaging cameras, the accuracy of photometry which can routinely be obtained is limited by significant sky…
Stellar intensity interferometers correlate photons within their coherence time and could overcome the baseline limitations of existing amplitude interferometers. Intensity interferometers do not rely on phase coherence of the optical…
We propose a new instrumental concept for long-baseline optical single-mode interferometry using integrated optics which were developed for telecommunication. Visible and infrared multi-aperture interferometry requires many optical…
context: The combination of image restoration and a Fabry-P\'{e}rot interferometer (FPI) based instrument in solar observations results in specific calibration issues. FPIs generally show variations over the field-of-view, while in the…
The recovery of an exoplanet's atmospheric parameters from its spectrum requires accurate knowledge of the spectral errors and covariances. Unfortunately, the complex image processing used in high-contrast integral-field spectrograph (IFS)…
The Gemini Planet Imager (GPI) is a near-infrared instrument that uses Adaptive Optics (AO), a coronagraph, and advanced data processing techniques to achieve very high contrast images of exoplanets. The GPI Exoplanet Survey (GPIES) is a…
Several recent studies advocate the use of spectral discriminators, which evaluate the Fourier spectra of images for generative modeling. However, the effectiveness of the spectral discriminators is not well interpreted yet. We tackle this…
Polaron spectral functions are computed for highly doped graphene-on-substrate and other atomically thin graphitic systems using the diagrammatic Monte Carlo technique. The specific aim is to investigate the effects of interaction on…
The factors limiting the resolution of displacement sensor based on extrinsic Fabry-Perot interferometer were studied. An analytical model giving the dependency of EFPI resolution on the parameters of an optical setup and a sensor…