Related papers: InSAR Phase Denoising: A Review of Current Technol…
This paper introduces a novel scheme to progressively estimate interferometric phases from a stack of synthetic aperture radar (SAR) images. The scheme is shown to yield comparable performance to full-covariance algorithms for a realistic…
Over the past decade, Interferometric Synthetic Aperture Radar (InSAR) has become a successful remote sensing technique. However, during the acquisition step, microwave reflections received at satellite are usually disturbed by strong…
Interferometric Synthetic Aperture Radar (InSAR) Imaging methods are usually based on algorithms of match-filtering type, without considering the scene's characteristic, which causes limited imaging quality. Besides, post-processing steps…
Interferometric Synthetic Aperture Radar (InSAR) imagery for estimating ground movement, based on microwaves reflected off ground targets is gaining increasing importance in remote sensing. However, noise corrupts microwave reflections…
Incoherent processing for synthetic aperture radar (SAR) is a promising approach that enables low implementation costs, simplified hardware designs and operations in high frequency spectrum compared to the conventional imaging methods using…
Passive radar has key advantages over its active counterpart in terms of cost and stealth. In this paper, we address passive radar imaging problem by interferometric inversion using a spectral estimation method with a priori information…
Phase unwrapping remains a critical and challenging problem in InSAR processing, particularly in scenarios involving complex deformation patterns. In earthquake-related deformation, shallow sources can generate surface-breaking faults and…
Interferometric Synthetic Aperture Radar (InSAR) is a powerful tool for monitoring surface deformation with high precision. However, low Signal-to-Noise Ratio (SNR) conditions, common in regions with low backscatter, can degrade phase…
Radar is a low-cost and ubiquitous automotive sensor, but is limited by array resolution and sensitivity when performing direction of arrival analysis. Synthetic Aperture Radar (SAR) is a class of techniques to improve azimuth resolution…
Interferometric Synthetic Aperture Radar (InSAR) imagery based on microwaves reflected off ground targets is becoming increasingly important in remote sensing for ground movement estimation. However, the reflections are contaminated by…
Phase unwrapping is a fundamental problem in InSAR data processing, supporting geophysical applications such as deformation monitoring and hazard assessment. Its reliability is limited by noise and decorrelation in radar acquisitions, which…
Interferometry can measure the shape or the material density of a system that could not be measured otherwise by recording the difference between the phase change of a signal and a reference phase. This difference is always between $-\pi$…
Target detection is the front-end stage in any automatic target recognition system for synthetic aperture radar (SAR) imagery (SAR-ATR). The efficacy of the detector directly impacts the succeeding stages in the SAR-ATR processing chain.…
Multipass SAR interferometry (InSAR) techniques based on meter-resolution spaceborne SAR satellites, such as TerraSAR-X or COSMO-Skymed, provide 3D reconstruction and the measurement of ground displacement over large urban areas.…
Interferometric phase (InPhase) imaging is an important part of many present-day coherent imaging technologies. Often in such imaging techniques, the acquired images, known as interferograms, suffer from two major degradations: 1) phase…
Synthetic aperture radar (SAR) interferometry (InSAR) is performed using repeat-pass geometry. InSAR technique is used to estimate the topographic reconstruction of the earth surface. The main problem of the range-Doppler focusing technique…
Monitoring of ground movement close to the rail corridor, such as that associated with landslips caused by ground subsidence and/or uplift, is of great interest for the detection and prevention of possible railway faults. Interferometric…
Operational near-real-time monitoring of Earth's surface deformation using Interferometric Synthetic Aperture Radar (InSAR) requires processing algorithms that efficiently incorporate new acquisitions without reprocessing historical…
Interferometric phase restoration has been investigated for decades and most of the state-of-the-art methods have achieved promising performances for InSAR phase restoration. These methods generally follow the nonlocal filtering processing…
The detection of early signs of volcanic unrest preceding an eruption, in the form of ground deformation in Interferometric Synthetic Aperture Radar (InSAR) data is critical for assessing volcanic hazard. In this work we treat this as a…