Related papers: Viscoelastic-Viscoplastic Strength Model for PBX
In this paper we address a model coupling viscoplasticity with damage in thermoviscoelasticity. The associated PDE system consists of the momentum balance with viscosity and inertia for the displacement variable, at small strains, of the…
Understanding the dynamics of instabilities along fluid-solid interfaces is critical for the efficacy of focused ultrasound therapy tools (e.g., histotripsy) and microcavitation rheometry techniques. Non-uniform pressure fields generated by…
In this work, we propose a deep learning (DL)-based constitutive model for investigating the cyclic viscoelastic-viscoplastic-damage behavior of nanoparticle/epoxy nanocomposites with moisture content. For this, a long short-term memory…
Flow-induced failure of granular materials is relevant to a broad range of geomechanical applications. Plasticity, which is the inherent failure mechanism of most granular materials, enables large deformations that can invalidate linearised…
A collision of viscoelastic bodies is analysed within a mathematically rigorous approach. We develop a perturbation scheme to solve continuum mechanics equation, which deals simultaneously with strain and strain rate in the bulk of the…
We introduce models for viscoelastic materials, both solids and fluids, based on logarithmic stresses to capture the elastic contribution to the material response. The matrix logarithm allows to link the measures of strain, that naturally…
Strength, ductility, and failure properties of metals are tailored by plastic deformation routes. Predicting these properties requires modeling of the structural dynamics and stress evolution taking place on several length scales. Progress…
Commonly used linear and nonlinear constitutive material models in deformation simulation contain many simplifications and only cover a tiny part of possible material behavior. In this work we propose a framework for learning customized…
We present a design for a piezoelectric-driven uniaxial stress cell suitable for use at ambient and cryogenic temperatures, and that incorporates both a displacement and a force sensor. The cell has a diameter of 46 mm and a height of 13…
Incompressible nonlinearly hyperelastic materials are rarely simulated in Finite Element numerical experiments as being perfectly incompressible because of the numerical difficulties associated with globally satisfying this constraint. Most…
Force-distance curve experiments are commonly performed in Atomic Force Microscopy (AFM) to obtain the viscoelastic characteristics of materials, such as the storage and loss moduli or compliances. The classic methods used to obtain these…
We address a three-dimensional model capable of describing coupled damage and plastic effects in solids at finite strains. Formulated within the variational setting of {\it generalized standard materials}, the constitutive model results…
Constitutive equations are derived for the viscoelastoplastic response of amorphous glassy polymers at isothermal loading with small strains. A polymer is treated as an ensemble of cooperatively relaxing regions (CRR) which rearrange at…
Dielectric spectroscopy measurements over a broad range of temperature and pressure were carried out on poly(oxybutylene) (POB), a type-A polymer (dielectrically-active normal mode). There are three dynamic processes appearing at lower…
Uniaxial tensile tests are performed on a polymethyl methacrylate (PMMA) grade over a range of temperatures near the glass transition and over two decades of strain rate. Deformation maps are constructed for Young's modulus, flow strength,…
This study presents the spreading of a single filament of a yield stress (viscoplastic) fluid extruded onto a pre-wetted solid surface. The filaments spread laterally under surface tension forces until they reach a final equilibrium shape…
In granular media, the presence of even small amounts of interparticle cohesion manifests as an increase in the bulk strength and stiffness, effects that are typically associated with an increase in the average number of constraints per…
Constitutive models play a crucial role in materials science as they describe the behavior of the materials in mathematical forms. Over the last few decades, the rapid development of manufacturing technologies have led to the discovery of…
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm…
Regarding lightweighting structures for aeronautics, automotive or construction applications, the level of performance of solutions proposed in terms of damping and isolation is fundamental. Hence multilayered plate appears as an…