Related papers: Continuous Phase Modulation With 1-Bit Quantizatio…
Today's communication systems typically use high resolution analog-to-digital converters (ADCs). However, considering future communication systems with data rates in the order of 100Gbit/s the ADC power consumption becomes a major factor…
Continuous phase modulation (CPM) with 1-bit quantization at the receiver is promising in terms of energy and spectral efficiency. In this study, CPM waveforms with symbol durations significantly shorter than the inverse of the signal…
High data rates require vast bandwidths, that can be found in the sub-THz band, and high sampling frequencies, which are predicted to lead to a problematically high analog-to-digital converter (ADC) power consumption. It was proposed to use…
We study the theoretical performance of a combined approach to demodulation and decoding of binary continuous-phase modulated signals under repetition-like codes. This technique is motivated by a need to transmit packetized or framed data…
In this work, we investigate dynamic oversampling techniques for large-scale multiple-antenna systems equipped with low-cost and low-power 1-bit analog-to-digital converters at the base stations. To compensate for the performance loss…
In high-dynamic range (HDR) analog-to-digital converters (ADCs), having many quantization bits minimizes quantization errors but results in high bit rates, limiting their application scope. A strategy combining modulo-folding with a low-DR…
Large-scale multiple-antenna systems with large bandwidth are fundamental for future wireless communications, where the base station employs a large antenna array. In this scenario, one problem faced is the large energy consumption as the…
In this work, we consider Terahertz (THz) communications with low-resolution uniform quantization and spatial oversampling at the receiver side, corresponding to a single-input multiple-output (SIMO) transmission. We fairly compare…
Future wireless communications systems are expected to operate at bands above 100GHz. The high energy consumption of analog-to-digital converters, due to their high resolution represents a bottleneck for future wireless communications…
The classical problem of phase retrieval has found a wide array of applications in optics, imaging and signal processing. In this paper, we consider the phase retrieval problem in a one-bit setting, where the signals are sampled using…
We present a novel iterative detection and decoding scheme for the uplink of large-scale multiuser multiple-antenna systems. In order to reduce the receiver's energy consumption and computational complexity, 1-bit analog-to-digital…
We consider binary continuous phase modulation (CPM) signals used in some recent low-cost and low-power consumption telecommunications standard. When these signals are generated through a low-cost transmitter, the real modulation index can…
Large-scale multiple-antenna systems have been identified as a promising technology for the next generation of wireless systems. However, by scaling up the number of receive antennas the energy consumption will also increase. One possible…
Two-channel modulo analog-to-digital converters (ADCs) enable high-dynamic-range signal sensing at the Nyquist rate per channel, but existing designs quantise both channel outputs independently, incurring redundant bitrate costs. This paper…
Analog-to-digital converters (ADCs) play a critical role in digital signal acquisition across various applications, but their performance is inherently constrained by sampling rates and bit budgets. This bit budget imposes a trade-off…
The next generation of wireless communications systems will employ new frequency bands such as those in the upper midband, millimeter-wave and sub-terahertz frequency bands. The high energy consumption of analog-to-digital converters…
We study the problem of the transmission of currently observed time variable signals via a channel that is capable of sending a single binary signal only for each measurement of the underlying process. For encoding and decoding, we suggest…
A discrete-time Wiener phase noise channel model is introduced in which multiple samples are available at the output for every input symbol. A lower bound on the capacity is developed. At high signal-to-noise ratio (SNR), if the number of…
To relax power consumption requirements in multigigabit/s communications systems low resolution quantization can be used. Information-theoretic results have shown that systems employing 1-bit quantization and oversampling are a viable…
This paper proposes a novel deep learning-based error correction coding scheme for AWGN channels under the constraint of one-bit quantization in the receivers. Specifically, it is first shown that the optimum error correction code that…