Related papers: Controlled Preparation, Characterization, and Band…
Monoclinic scheelite bismuth vanadate (BiVO4) is a promising photoanode for water splitting yet the PEC performance is limited due to its relatively higher (2.4 eV) band gap. Here, we successfully decreased its the band gap to 1.72 eV by…
The structural, optical and electrical properties of spray deposited antimony (Sb) doped tin oxide (SnO2) thin films, prepared from SnCl4 precursor, have been studied as a function of antimony doping concentration. The doping concentration…
Thin p-type Sb-doped ZnO films were grown by filtered vacuum arc deposition (FVAD), on untreated glass samples. The arc cathode was prepared by dissolving Sb into molten Zn. The deposition was performed with 200 A arc current, running for…
We report very large bandgap enhancement in SrTiO3 (STO) films (fabricated by pulsed laser deposition below 800 {\deg}C), which can be up to 20% greater than the bulk value, depending on the deposition temperature. The origin is…
Vanadium dioxide (VO2) is a phase transition material that undergoes a reversible insulator-metal phase transition at ~ 68 C. Atmospheric pressure thermal oxidation (APTO) of vanadium (V) is a simple VO2 synthesis method in which V thin…
In this work, the results of fabricating ultra thin VO$_2$ films on the technologically relevant amorphous SiO$_2$ surface using reactive DC magnetron sputtering are presented. Results indicate that a post deposition anneal in low partial…
Vanadium dioxide is a complex oxide material, which shows large resistivity and optical reflectance change while transitioning from the insulator to metal phase at ~68 {\deg}C. In this work, we use a modified atmospheric thermal oxidation…
This work reports the fabrication and characterization of high-quality tungsten-doped vanadium dioxide (WxV1-xO2, x = 0~3 at. %) by thermal oxidation of sputtered tungsten-vanadium alloyed thin films with different atomic percentages and…
Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
RF sputtered ZnO and Al:ZnO films are attractive transparent conductive oxides for fabrication of opto-electronic devices. In this paper we present efforts to control carrier concentration and mobility of ZnO/Al:ZnO thin films by…
Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical…
LiNbO3 films doped with vanadium (V) were deposited using RF magnetron sputtering technique. To realize doping with a wider range of V concentration, a 30 mm V metal inlaid target asymmetrically embedded in the 150 mm lithium niobate target…
Vanadium silicide, V$_3$Si, is a promising superconductor for silicon-based superconducting (SC) devices due to its compatibility with silicon substrates and its potential for integration into existing semiconductor technologies. However,…
Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…
Among the wide bandgap semiconductors, TiO$_{2}$ is the highly stable and cost-efficient semiconductor used for the different photocatalysis processes like water splitting, chemical waste degradation, anti-micro bacterial activities, and…
Large-area deposition of Aluminium-Scandium-Nitride (Al1-xScxN) thin films with higher Sc content (x) remains challenging due to issues such as abnormal orientation growth, stress control, and the undesired crystal phase. These anomalies…
The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis…
Vanadium oxide (VOx) is a material of significant interest due to its metal-insulator transition (MIT) properties as well as its diverse stable antiferromagnetism depending on the valence states of V and O with distinct MIT transitions and…
Tin (IV) oxide (SnO2) sols have been synthesized from SnCl2.2H2O precursor solution by applying two different processing conditions. The prepared sols were then deposited on UV-Ozone treated quartz and soda lime glass (SLG) substrates by…