Related papers: Inverted rear-heterojunction GaInP solar cells usi…
The effect of chemical doping of graphene films on the photovoltaic properties of the graphene/silicon Schottky junction solar cells was investigated. Thionyl chloride modification greatly enhanced the conductivity of graphene film,…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
Single-crystal silicon wafers were hyperdoped respectively by sulfur, selenium, and tellurium element using ion implantation and nanosecond laser melting. The hyperdoping of such chalcogen elements endowed the treated silicon with a strong…
Zinc Oxide is a thoroughly studied wide-bandgap semiconductor possessing excellent optical and electronic properties at room temperature. The renewed interest in this material has been generated by doping with various impurities in order to…
Ce-doped glass is a well-established solution for ultraviolet and ionizing radiation shielding of solar cells in space. Traditionally, Ce-glass protected Si or III-V based devices as an overlaying cap. However, for emerging photovoltaics…
Selenium is experiencing renewed interest as a promising candidate for the wide bandgap photoabsorber in tandem solar cells. However, despite the potential of selenium-based tandems to surpass the theoretical efficiency limit of single…
We demonstrate graded AlGaN/GaN heterojunction bipolar transistors (HBTs) with selective injection of minority carriers across a p-GaN base and patterned regrown base contacts. The selective injection design regulates minority carrier…
Doping cadmium oxide with rare earth (RE) elements is a way to control the band gap and enhance carrier concentration and mobility. This work presents how one of REs, europium, impacts performance of CdO/Si diode. The samples were grown…
The applications of optical links in collider experiments provide the advantage of high-speed data transmission with low mass fibers over distances of a few hundred meters. Ge-doped multi-mode fibers are evaluated for radiation tolerance in…
Tin perovskites are the most promising environmentally friendly alternative to lead perovskites. Among tin perovskites, FASnI3 (CH4N2SnI3) shows optimum band gap, and easy processability. However, the performance of FASnI3 based solar cells…
The phosphide-based III-V semiconductors InP, GaP, and In$_{0.5}$Ga$_{0.5}$P are promising materials for solar panels in outer space and radioisotope batteries, for which lifetime is a major issue. In order to understand high radiation…
The limited quantum yield of strained monolayer transition metal dichalcogenides grown by vapor-phase methods and during transfer-based stacking poses a fundamental challenge for their optoelectronic applications. Here, we introduce the…
We study from first principles the magnetic, electronic, orbital and structural properties of the LaMnO3 doped with gallium replacing the Mn-site. The gallium doping reduces the Jahn-Teller effect, and consequently the bandgap.…
Previous studies of reverse-bias stability in perovskite solar cells have focused primarily on voltage controlled reverse-bias tests. Here we instead present an investigation of perovskite solar cell degradation under well-defined, constant…
A combination of transient photovoltage (TPV), voltage dependent charge extraction (CE) and time delayed collection field (TDCF) measurements is applied to poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl]…
Heterostructures based on atomically thin semiconductors are considered a promising emerging technology for the realization of ultrathin and ultralight photovoltaic solar cells on flexible substrates. Much progress has been made in recent…
Electrically tunable devices contribute significantly to key functions of photonics integrated circuits. Here, we demonstrate the tuning of the optical index of refraction based on hybrid integration of multi-layered anisotropic GaGeTe on a…
Recent advances of highly efficient solar cells based on organic-inorganic halide perovskites have triggered intense research efforts to establish the fundamental properties of these materials. In this work, we utilized diamond anvil cell…
The charge accumulation properties of p-i-n perovskite solar cells were investigated using three representative organic and inorganic hole transporting layer (HTLs): a) Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS, Al…
Hot-carrier solar cells are envisioned to utilize energy filtering to extract power from photogenerated electron-hole pairs before they thermalize with the lattice, and thus potentially offer higher power conversion efficiency compared to…