Related papers: A Study of Interference Distributions in Millimete…
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in developing low-power…
The millimeter wave (mmWave) band has the potential to provide high throughput among wearable devices. When mmWave wearable networks are used in crowded environments, such as on a bus or train, antenna directivity and orientation hold the…
In this paper we present the first comprehensive study of the multi-user capacity of millimeter-wave (mm-wave) urban cellular networks, using site-specific ray-tracing propagation data and realistic antenna array patterns. We compare the…
The focus of this paper is on beamforming in a millimeter-wave (mmW) multi-input multi-output (MIMO) setup that has gained increasing traction in meeting the high data-rate requirements of next-generation wireless systems. For a given MIMO…
Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing…
The millimeter-wave (mm-wave) bands enable very large antenna arrays that can generate narrow beams for beamforming and spatial multiplexing. However, directionality introduces beam misalignment and leads to reduced energy efficiency. Thus,…
In this paper, we provide an analytical framework to analyze heterogeneous downlink mmWave cellular networks consisting of K tiers of randomly located base stations (BSs) where each tier operates in a mmWave frequency band.…
The millimeter-wave (mmWave) frequencies have attracted considerable attention for fifth generation (5G) cellular communication as they offer orders of magnitude greater bandwidth than current cellular systems. However, the medium access…
We present measurements and analysis of self-interference in multi-panel millimeter wave (mmWave) full-duplex communication systems at 28 GHz. In an anechoic chamber, we measure the self-interference power between the input of a…
In millimeter wave (mmWave) communication systems, narrow beam operations overcome severe channel attenuations, reduce multiuser interference, and thus introduce the new concept of noise-limited mmWave wireless networks. The regime of the…
Millimeter wave (mmWave) holds promise as a carrier frequency for fifth generation cellular networks. Because mmWave signals are sensitive to blockage, prior models for cellular networks operated in the ultra high frequency (UHF) band do…
Millimeter wave (mmWave) communication is one of the most promising technologies in fifth generation (5G) mobile networks due to its access to a large amount of available spectrum resources. Despite the theoretical potential of a high data…
This paper investigates the coexistence between two key enabling technologies for the fifth generation (5G) mobile networks, non-orthogonal multiple access (NOMA) and millimeter-wave (mmWave) communications. Particularly, the application of…
Beamforming is one of the key techniques in millimeter wave (mmWave) multi-input multi-output (MIMO) communications. Designing appropriate beamforming not only improves the quality and strength of the received signal, but also can help…
The millimeter wave (mmWave) frequencies offer the availability of huge bandwidths to provide unprecedented data rates to next-generation cellular mobile terminals. However, mmWave links are highly susceptible to rapid channel variations…
Initial access is the process which allows a mobile user to first connect to a cellular network. It consists of two main steps: cell search (CS) on the downlink and random access (RA) on the uplink. Millimeter wave (mmWave) cellular systems…
Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to rates of multiple Gbps (gigabit per second) per user. Though mmWave can be readily used in…
Mobility management is a major challenge for the wide-spread deployment of millimeter-wave (mmWave) cellular networks. In particular, directional beamforming in mmWave devices renders high-speed mobility support very complex. This…
This paper focuses on multiuser MIMO channel estimation and data transmission at millimeter wave (mmWave) frequencies. The proposed approach relies on the time-division-duplex (TDD) protocol and is based on two distinct phases. First of…
Future cellular systems based on the use of above-6 GHz frequencies, the so-called millimeter wave (mmWave) bandwidths, will heavily rely on the use of antenna arrays both at the transmitter and at the receiver, possibly with a large number…