Related papers: Progress on the ISIS synchrotron digital low level…
The PIP-II linac is an international collaboration project with in kind contributions of key subsystems from multiple countries including India (DAE). In the research and development phase of the project, the LLRF and resonance control…
The strategy used to develop the NIF Integrated Computer Control System (ICCS) calls for incremental cycles of construction and formal test to deliver a total of 1 million lines of code. Each incremental release takes four to six months to…
A superconducting RF accelerator test facility is currently under construction at Fermilab. The accelerator will consist of an electron gun, 40 MeV injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, and…
We propose a novel acceleration scheme for fixed-field accelerators (FFAs), in which RF buckets with harmonic numbers $h = 1$ and $h = 2$ are time-sequenced to form a single, continuous acceleration path. This approach completes…
Presently, the manufacturing of active RF devices like klystrons is dominated by expensive and time consuming cycles of machining and brazing. In this article we characterize the RF properties of X-band klystron cavities and an integrated…
A LLRF control and data acquisition system for the 8-cavity cryomodule1 at the ILCTA has been implemented using three 33-channel ADC boards in a VXI mainframe. One card each is dedicated to the cavity probes for vector control, forward…
CEA is committed to the design, construction and commissioning of a Medium Energy Beam Transfer line and a superconducting linac (SCL) for SARAF accelerator in order to accelerate 5mA beam of either protons from 1.3 MeV to 35 MeV or…
This paper presents a novel method for laser frequency stabilisation in the Laser Interferometer Space Antenna (LISA) mission by locking a laser to two stable length references - the arms of the interferometer and an on-board optical…
The LIGHT (Linac for Image-Guided Hadron Therapy) project was initiated to develop a modular proton accelerator delivering beam with energies up to 230 MeV for cancer therapy. The machine consists of three different kinds of accelerating…
To meet the stringent time calibration requirements for the Belle II experiment upgrade, particularly for its large-size KL and Muon Detector comprising tens of thousands of scintillator channels with time resolutions better than 100 ps, we…
Multiple-input multiple-output (MIMO) techniques can help in scaling the achievable air-to-ground (A2G) channel capacity while communicating with drones. However, spatial multiplexing with drones suffers from rank deficient channels due to…
FLASH radiation therapy calls for the delivery of fast bursted spills of particles with dose delivery times of the order of milliseconds. The requirements overlap with fundamental physics experimental requests that are being studied at…
In the MICE experiment at RAL the upstream time-of-flight detectors are used for particle identification in the incoming muon beam, for the experiment trigger and for a precise timing (sigma_t ~ 50 ps) with respect to the accelerating RF…
High-power multi-beam klystrons represent a key component to amplify RF to generate the accelerating field of the superconducting radio frequency (SRF) cavities at European XFEL. Exchanging these high-power components takes time and effort,…
New high current accelerator facilities like proposed for HIDIF or ESS require a beam with a high brilliance. These beams can not be produced by a single pass rf-linac. The increase in brightness in such a driver linac is done by several…
Pulsed microwave stability in linear accelerators (LINACs) is critical for maintaining high-quality electron beams in synchrotron radiation and free-electron laser (FEL) facilities. This study establishes and validates a zero-crossing…
In many experiments, the simultaneous emission of multiple wavelengths of FEL (Free-Electron Laser) is significant. For the pulsed-mode FEL facility, we must accelerate multiple electron beams in one microwave pulse, and they may be in…
SLAC National Accelerator Laboratory is collaborating with Arizona State University to design a LLRF system towards the advancement of the ASU Compact X-ray Light Source (CXLS). The CXLS is a phased project to develop small brilliant x-ray…
The ISAC 35 MHz RFQ is designed to accelerate ions of A/q up to 30 from 2keV/u to 150keV/u in cw mode. The RFQ structure is 8 meters long and the vane-shaped rods are supported by 19 rings spaced 40 cm apart. An unusual feature of the…
The Los Alamos Neutron Science Center (LANSCE) accelerator at Los Alamos National Laboratory (LANL) has been in service for over 50 years. Efforts to update and modernize crucial systems, many of which are origi-nal, are ongoing. This paper…