Related papers: Digital Low-Level RF control system for Advanced L…
PIP-II is a superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an RFQ and buncher cavities along with 25 superconducting cryo-modules…
Reducing the size and complexity of high-performance timekeeping devices is an ever-growing need for various applications, such as 6G wireless technology, positioning, navigation and timing (PNT), Internet of Things (IoT), and ultrafast…
Radio-frequency (RF) signal generators are standard laboratory equipment and a wide-range of open-source and commercial devices exists to address their many applications. Nonetheless, only few expensive and proprietary solutions can be…
The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons. The ability…
Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise,…
A delayed feedback reservoir (DFR) is a type of reservoir computing system well-suited for hardware implementations owing to its simple structure. Most existing DFR implementations use analog circuits that require both digital-to-analog and…
We present a method of laser frequency stabilization based on the linear dichroism signal in a transverse magnetic field. The method is similar to the DAVLL (Dichroic Atomic Vapor Laser Lock) method. It differs from DAVLL and from its…
The Spallation Neutron Source (SNS) Front-End Systems Group at Lawrence Berkeley National Lab (LBNL) is developing a Radio Frequency Quadrupole (RFQ) to accelerate an H- beam from 65 keV to 2.5 MeV at the operating frequency of 402.5 MHz.…
The ISIS buncher system at TRIUMF operates at frequencies of 23MHz, 46MHz, and 4.6MHz. The 23MHz and 46MHz signals drive two buncher cavities, while the 4.6MHz signal drives the 5:1 selector. The previous analog-digital hybrid system has…
Within the framework of the first phase of MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, called MINERVA, IJCLab was in charge of a fully equipped Spoke cryomodule prototype development, tested at 2K. It…
The digital phase lock loop described in this paper has been in use on the Submillimeter Array (SMA) front-end receivers for over a decade and has been a key element in obtaining all of the high quality images that have been published from…
The European XFEL (EuXFEL) is a free-electron laser in the X-ray range for users. Its high availability is one of the key aspects of the machine. In 2022, it entered in the sixth year of operation. The EuXFEL linac is based on the TESLA…
This paper presents a conceptual approach to phase modulation of the cavity field in storage ring RF systems. An implementation of the concept on Dimtel low-level RF controllers is also presented. The method is illustrated with the test…
A LLRF control and data acquisition system for the 8-cavity cryomodule1 at the ILCTA has been implemented using three 33-channel ADC boards in a VXI mainframe. One card each is dedicated to the cavity probes for vector control, forward…
Shanghai Synchrotron Radiation Facility (SSRF), is one of the third-generation high-beam current (3.5 GeV) synchrotron light sources. In the storage ring of SSRF, multi-bunch instabilities would increase beam emittance and energy spread,…
Attosecond science has demonstrated that electrons can be controlled on the sub-cycle time scale of an optical wave, paving the way toward optical frequency electronics. Using controlled few-cycle optical waveforms, the study of sub-cycle…
Hybrid acoustic-RF systems offer excellent ranging accuracy, yet they typically come at a power consumption that is too high to meet the energy constraints of mobile IoT nodes. We combine pulse compression and synchronized wake-ups to…
Due to the need for higher reliability and performance from RF circuits, multi-port reflectometers are increasingly used as low-overhead impedance monitors. In this work, using periodic structures as multi-ports is proposed. Periodic…
Laser power instability, encompassing random jitter and slow drift, severely limits the performance of optically pumped magnetometers (OPMs) in detecting ultra-weak magnetic fields, especially in large-scale OPM arrays for…
Rydberg atomic receivers have recently emerged as a promising platform for radio-frequency (RF) sensing and reception due to their intrinsic broadband response and calibration-free operation. Most existing receivers rely on four-level…