Related papers: A Silicon MEMS EM vibration energy harvester
We theoretically study a vibrating pair of parallel electrodes bridged by a (deformed) liquid droplet, which is a recently developed microfluidic device to harvest vibrational energy. The device can operate with various liquids, including…
This paper introduces a new semi-flexible device able to turn thermal gradients into electricity by using a curved bimetal coupled to an electret-based converter. In fact, a two-steps conversion is carried out: (i) a curved bimetal turns…
This paper presents a fully integrated, self-starting shock-optimized Synchronous Electric Charge Extraction (SECE) interface for piezoelectric harvesters (PEHs). After introducing a model of the electromechanical system under shocks, we…
This paper presents theoretical analysis of a MEMS electrostatic energy harvester configured as the Bennet's doubler. Steady-state operation of the doubler circuit can be approximated by a right-angled trapezoid Q-V cycle. A similarity…
Micro-electro-mechanical system (MEMS) microphones (mics) with two acoustic ports are currently receiving considerable interest, with the promise of achieving higher directional sensitivity compared to traditional one-port architectures.…
We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization…
Piezoelectric Energy Harvesters (PEHs) are typically employed to provide additional source of energy for a sensing system. However, studies show that a PEH can be also used as a sensor to acquire information about the source of vibration by…
This paper is concerned with generators that harvest electrical energy from the kinetic energy present in the sensor nodes environment. These generators have the potential to replace or augment battery power which has a limited lifetime and…
This work demonstrates preliminary results on energy harvesting from a linearly stable flutter-type system with circulatory friction forces. Harmonic external forcing is applied to study the energy flow in the steady sliding configuration.…
Ensembles of nitrogen vacancy centres (NVCs) in diamond can be employed for sensitive magnetometry. In this work we present a fiber-coupled NVC magnetometer with an unshielded sensitivity of (30 $\pm$ 10) pT/$\sqrt{\textrm{Hz}}$ in a (10 -…
Microwave superconducting resonators are extensively studied in fields such as quantum computing and electron spin resonance (ESR) spectroscopy. However, the integration of superconducting resonators with feedback mechanisms to create…
The infusion of renewable energy sources into the conventional synchronous generation system decreases the overall system inertia and negatively impacts the stability of its primary frequency response. The lowered inertia is due to the…
This study explores the impact of parameter mismatch on the stability of cross-well motion in energy harvesters, using a basin stability metric. Energy harvesters, essential for converting ambient energy into electricity, increasingly…
This paper demonstrates a vibration test for a resonant MEMS scanning system in operation to evaluate the vibration immunity for automotive lidar applications. The MEMS mirror has a reinforcement structure on the backside of the mirror,…
The Medium Energy X-ray telescope (ME) is one of the three main telescopes on board the Insight Hard X-ray Modulation Telescope (Insight-HXMT) astronomy satellite. ME contains 1728 pixels of Si-PIN detectors sensitive in 5-30 keV with a…
Active microelectromechanical systems can couple the nanomechanical domain with the electronic domain by integrating electronic sensing and actuation mechanisms into the micromechanical device. This enables very fast and sensitive…
A detailed analysis of electromechanically induced absorption (EMIA) in a circuit nano-electromechanical hybrid system consisting of a superconducting microwave resonator coupled to a nanomechanical beam is presented. By performing two-tone…
We present a new spin-exchange relaxation-free vector magnetometer with suppressed 1/f probe noise, achieved by applying a small DC bias field and a comb of magnetic DC $\pi$ pulses along the pump direction. This results in a synchronous…
Microelectromechanical (MEMS) resonators are widely used in timekeeping applications, and recent advances in fabrication, materials, and encapsulation technology have advanced their potential as high stability frequency references. However,…
The Duke storage ring is a dedicated driver for the storage ring based oscillator free-electron lasers (FELs), and the High Intensity Gamma-ray Source (HIGS). It is operated with a beam current ranging from about 1 mA to 100 mA per bunch…