Related papers: Analysis of Skin Effect in High Frequency Isolatio…
High frequency transformers are an integral part of power electronics devices and their parasitic parameters influence the performance and efficiency of the overall system. In this paper, transformer leakage inductances and parasitic…
Broadband FMR responses for metallic single-layer and bi-layer magnetic films with total thicknesses smaller than the microwave magnetic skin depth have been studied. Two different types of microwave transducers were used to excite and…
In conventional finite element simulations, foil windings with a thin foil and many turns require many mesh elements. This renders models quickly computationally infeasible. With the use of homogenization approaches, the finite element mesh…
An accurate modeling of skin effect inside conductors is of capital importance to solve transmission line and scattering problems. This paper presents a surface-based formulation to model skin effect in conductors of arbitrary cross…
AC losses of YBCO coated conductors are investigated by calculation and experiment for the higher frequency regime. Previous research using YBCO film deposited onto single crystal substrates demonstrated the effectiveness of filamentary…
We consider the equations of electromagnetism set on a domain made of a dielectric and a conductor subdomain in a regime where the conductivity is large. Assuming smoothness for the dielectric--conductor interface, relying on recent works…
DC-DC converters with galvanic isolation are a key element in the aircraft DC distribution system and Dual and Triple Active Bridge converters are one of the most interesting candidates in this application. The high-frequency transformer…
Exchange-coupled nonmagnetic (NM) and ferromagnetic (FM) conducting multilayers are crucial for microwave spintronic devices of the future. We demonstrate, experimentally and theoretically, that in broadband measurements of ferromagnetic…
Demanding microwave applications in a magnetic field require the material optimization not only in zero-field but, more important, in the in-field flux motion dominated regime. However, the effect of artificial pinning centers (APC) remains…
The possibility of a substantial reduction of weight and size of electrical generators is the main incentive behind the effort to develop superconducting armature windings based on coated conductors in the form of wide tapes with large…
Numerical simulations of the hysteretic ac loss in a coated superconductor with a more realistic version of architecture were performed via finite-element technique in the presence of an oscillating magnetic field. The coated superconductor…
In the field of spintronics, ferromagnetic/non-magnetic metallic multilayers are core building blocks for emerging technologies. Resonance experiments using stripline transducers are commonly used to characterize and engineer these stacks…
The skin effect is analyzed to provide the numerous measurements of the penetration depth of the electromagnetic field in superconducting materials with a theoretical basis. Both the normal and anomalous skin effects are accounted for…
This paper presents analytic study and design considerations of flat wire inductors with distributed gaps for high-power and compact DC-DC Converters. The focus is eddy current loss components within the conductors due to fringing and…
The inductance/impedance due to thin metallic structures in non-destructive testing (NDT) is difficult to evaluate. In particular, in Finite Element Method (FEM) eddy current simulation, an extremely fine mesh is required to accurately…
Old susceptibility data, measured in superconducting materials at low-frequency, are shown to be accounted for consistently within the framework of a recently published\cite{sz1} analysis of the skin effect. Their main merit is to emphasize…
Foil windings have, due to their layered structure, different properties than conventional wire windings, which make them advantageous for high frequency applications. Both electromagnetic and thermal analyses are relevant for foil…
For the radiofrequency (RF) applications of normal conducting film with large mean free path at high frequency and low temperature, the anomalous skin effect differs considerably from the normal skin effect with field decaying exponentially…
Power converters inherently display non-linear load characteristics, resulting in a high level of mains harmonics, and hence the necessity of implementing Power Factor Correction (PFC). Active PFC circuitry typically comprises an inductor…
Power cables have complex geometries in order to reduce their AC resistance. The cross-section of a cable consists of several conductors that are electrically insulated from each other to counteract the current displacement caused by the…