Related papers: Nanostructured La0.5Ba0.5CoO3 as cathode for solid…
We evaluated for the first time the use of nanostructured layered perovskites of formulae LnBaCo2O6-d with Ln = Sm and Gd (SBCO and GBCO, respetively) as SOFC cathodes, finding promising electrochemical properties in the intermediate…
In this work we outline the mechanisms contributing to the oxygen reduction reaction in nanostructured cathodes of La0.8Sr0.2MnO3 (LSM) for Solid Oxide Fuel Cells (SOFC). These cathodes, developed from LSM nanostructured tubes, can be used…
La0.6Sr0.4Fe0.8Mn0.2O3 (LSFM) compound is synthesized by Sol-gel method and evaluated as a cathode material for the intermediate temperature solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD) indicates that the LSFM has a Rhombohedral…
In this work we studied the influence of particle size and agglomeration in the performance of solid oxide fuel cell cathodes made with nanoparticles of La0.8Sr0.2MnO3. We followed two synthesis routes based on the Liquid Mix method. In…
Micro-solid oxide fuel cells based on thin films have strong potential for use in portable power devices. However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures.…
We describe Na0.67Mn0.625Fe0.25Co0.125O2 (NMFCO), a P2-type sodium-ion battery cathode. Our composition, with significantly less Co than in an earlier study, shows discharge capacity close to 190 mAhg-1 and specific energy density exceeding…
Single-phased La0.6Sr0.4Co1-yFeyO3-d (y = 0.2, 0.5, 0.8) nanorods exhibiting the rhombohedral perovskite-type phase were synthesized by a pore-wetting technique. We studied their chemical composition, crystal and electronic structures,…
We report the electrochemical performance of nanostructures of Na$_{0.66}$V$_4$O$_{10}$ as cathode material for rechargeable batteries. The Rietveld refinement of room temperature x-ray diffraction pattern shows the monoclinic phase with…
The two-dimensional electron liquid which forms between the band insulators LaAlO3 (LAO) and SrTiO3 (STO) is a promising component for oxide electronics, but the requirement of using single crystal SrTiO3 substrates for the growth limits…
Perovskites are mixed oxides with the general formula ABO3. Many different compositions have been found to be possible and their number is growing rapidly due to their characteristics that make them ideal for various applications, such as…
In oxide materials, nanostructuring effect has been found very promising approach for the enhancement of \textit{figure-of-merit}, \textit{ZT}. In the present work, we have synthesized La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ (LSMO) compound using…
Simultaneous study of magnetic and electrocatalytic properties of cobaltites under extreme conditions expands understanding of physical and chemical processes proceeding in them with the possibility of their further practical application.…
Li2WO4 (LWO) is recognized for its potential as a solid-state electrolyte and it has demonstrated the ability to enhance the electrochemical performance of LiCoO2 (LCO) cathodes in Li-ion batteries. However, prior investigations into LWO…
The observation of superconductivity at 4.3 K in a new crystalline form of Na0.3CoO2*1.3H2O is reported. The new superconductor has three layers of CoO6 octahedra per crystallographic unit cell, in contrast to the previously reported…
Layered CoO$_2$ is of great interest for its promising properties but is meta-stable in its bulk form. CoO$_2$ was synthesized by converting the quasi-one-dimensional crystal structure of bulk Ca$_3$Co$_2$O$_6$ via a hydrothermal treatment.…
Controlled breakdown has recently emerged as a highly accessible technique to fabricate solid-state nanopores. However, in its most common form, controlled breakdown creates a single nanopore at an arbitrary location in the membrane. Here,…
Nanostructured La0.67Ca0.33MnO3 (NS-LCMO) was formed by pulsed-laser deposition on the surface of porous Al2O3. The resistance peak temperature (Tp) of the NS-LCMO increases with increasing average thickness of the films, while their Curie…
A Li-conversion alpha-Fe2O3@C nanocomposite anode and a high-voltage LiNi0.5Mn1.5O4 cathode are synthesized in parallel, characterized, and combined in a Li-ion battery. alpha-Fe2O3@C is prepared via annealing of maghemite iron oxide and…
Direct carbon fuel cells (DCFCs) are highly efficient power generators fueled by abundant and cheap solid carbons. However, the limited formation of triple phase boundaries (TPBs) within fuel electrodes inhibits their performance even at…
LSCF is a promising candidate for the cathode in SOFCs. Understanding the microstructural characteristics is crucial to its application because they predominately determine the performance and durability of the porous cathodes and hence of…