Related papers: Consistent time-to-failure tests and analyses of a…
Thixotropy is a phenomenon related to time dependent change in viscosity in presence or absence of flow. The yield stress, on the other hand, represents the minimum value of stress above which steady flow can be sustained. In addition, the…
Granular materials are involved in most industrial and environmental processes, as well as many civil engineering applications. Although significant advances have been made in understanding the statics and dynamics of cohesionless grains…
A new model is presented to predict hydrogen-assisted fatigue. The model combines a phase field description of fracture and fatigue, stress-assisted hydrogen diffusion, and a toughness degradation formulation with cyclic and hydrogen…
The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy…
The progressive instability behaviour of compressed dry-stone rectangular pillars loaded with an eccentric load is assessed experimentally and compared with the theory. Photoelastic compression tests were designed and executed on…
Providing assurances for self-adaptive systems is challenging. A primary underlying problem is uncertainty that may stem from a variety of different sources, ranging from incomplete knowledge to sensor noise and uncertain behavior of humans…
An experimental system has been found recently, a coagulated CaCO3 suspension system, which shows very variable yield behaviour depending upon how it is tested and, specifically, at what rate it is sheared. At P\'eclet numbers Pe > 1 it…
The modelling of heterogeneous and architected materials poses a significant challenge, demanding advanced homogenisation techniques. However, the complexity of this task can be considerably simplified through the application of micropolar…
Applying constant tensile stress to a piece of amorphous solid results in a slow extension, followed by an eventual rapid mechanical collapse. This "creep" process is of paramount engineering concern, and as such was the subject of study in…
Double-wall cylindrical shells are widely used in applications where resistance to acoustic shock loading is critical. While the transient vibroacoustic behavior of single-walled shells has been extensively investigated, extending these…
Negative differential resistance remains an attractive but elusive functionality, so far only finding niche applications. Atom scale entities have shown promising properties, but viability of device fabrication requires fuller understanding…
This work deals with the modelling and simulation of curing phenomena in adhesively bonded piezo metal composites which consist of an adhesive layer with integrated piezoelectric module and two surrounding metal sheet layers. In a first…
We investigate the mechanics of two asymmetric ribbons bound at one end and pulled apart at the other ends. We characterize the elastic junction near the bonding and conceptualize it as a bending boundary layer. While the size of this…
In the analysis of structures under dynamic loads, selection of a proper time step has a great influence to reach exact results. In this research determination of proper time step in dynamic analysis of railway bridges under high speed…
The coercivity and resistivity of a Pt/Co/AlOx/Pt junction are measured under sustained voltage application. High bias voltages of either polarity are determined to cause a strongly enhanced, reversible coercivity modification compared to…
Our general aim is to give sufficient conditions for robustness behavior and convergence to the equilibrium point of linear time-varying fractional system's solutions. We approach this problem using as a framework a series of recent results…
Dynamical systems that evolve continuously over time are ubiquitous throughout science and engineering. Machine learning (ML) provides data-driven approaches to model and predict the dynamics of such systems. A core issue with this approach…
Accelerated impressed current testing is the most common experimental method for assessing the susceptibility to corrosion-induced cracking, the most prominent challenge to the durability of reinforced concrete structures. Although it is…
We present experimental results for the dependency of the pull-off time (failure time) on the pull-off force for suction cups in the air and in water. The results are analyzed using a theory we have developed for the contact between suction…
Hyperelastic materials models are well established to describe the non-linear stress-strain relations of elastomers. In this paper, a polyurethane adhesive is considered as an exemplary material and subjected to tensile, compressive and…