Related papers: Fourier transform infrared spectroscopy with visib…
The principles and practice of astronomical imaging Fourier transform spectroscopy (FTS) at far-infrared wavelengths are described. The Mach-Zehnder interferometer design has been widely adopted for current and future imaging FTS…
Molecular spectroscopy in the mid-infrared portion of the electromagnetic spectrum (3--25 um) has been a cornerstone interdisciplinary analytical technique widely adapted across the biological, chemical, and physical sciences. Applications…
The development of optical fibers has revolutionized telecommunications by enabling long-distance broad-band transmission with minimal loss. In turn, the ubiquity of high-quality low-cost fibers enabled a number of additional applications,…
In order to efficiently image a non-absorbing sample (a phase object), dedicated phase contrast optics are required. Typically, these optics are designed with the assumption that the sample is weakly scattering, implying a linear relation…
Recent developments in machine learning and signal processing have resulted in many new techniques that are able to effectively capture the intrinsic yet complex properties of hyperspectral imagery. Tasks ranging from anomaly detection to…
Mid-infrared photothermal microscopy is a new chemical imaging technology in which a visible beam senses the photothermal effect induced by a pulsed infrared laser. This technology provides infrared spectroscopic information at sub-micron…
Multispectral mid-infrared (2-5 ${{\mu}m}$) imaging is a critical capability across science and technology, offering a window into the vibrational and thermal landscape of matter that is inaccessible to visible sensors. It bridges the…
Chromatic dispersion critically impacts the performance of numerous applications ranging from telecommunication links to ultrafast optics and nonlinear devices, yet fast and precise measurements are challenging, especially for short…
We propose and demonstrate that a conventional multimode fiber can function as a high resolution, low loss spectrometer. The proposed spectrometer consists only of the fiber and a camera that images the speckle pattern generated by…
Fourier-transform spectroscopy (FTS) has been widely used as a standard analytical technique over the past half-century. FTS is a simple and robust autocorrelation-based technique that is compatible with both temporally coherent and…
There is an increasing demand for precise molecular spectroscopy, in particular in the mid-infrared fingerprint window that hosts a considerable number of vibrational signatures, whether it be for modeling our atmosphere, interpreting…
We report a demonstration of laser Doppler holography at a sustained acquisition rate of 250 Hz on a 1 Megapixel complementary metal-oxide-semiconductor (CMOS) sensor array and image display at 10 Hz frame rate. The holograms are optically…
SpIOMM is an imaging Fourier transform spectrometer designed to obtain the visible range (350 to 850 nm) spectrum of every light source in a circular field of view of 12 arcminutes in diameter. It is attached to the 1.6-m telescope of the…
Two- and multi-dimensional spectroscopy is used in physics and chemistry to obtain structural and dynamical information that would otherwise be invisible by the projection into a one-dimensional data set such as a single emission or…
We have used a photothermal technique, in which chopped light heats the front surface of a small ( ~ 1 mm2) sample and the chopping frequency dependence of thermal radiation from the back surface is measured with a liquid nitrogen cooled…
CarbON CII line in post-rEionization and ReionizaTiOn (CONCERTO) is a low-resolution spectrometer with an instantaneous field-of-view of 18.6 arcmin, operating in the 130-310 GHz transparent atmospheric window. It is installed on the…
We develop a novel hyperspectral imaging system using structured illumination in an SLM-based Michelson interferometer. In our design, we use a reflective SLM as a mirror in one of the arms of a Michelson interferometer, and scan the…
IR spectroscopy such as Fourier transform infrared spectroscopy (FTIR) are widely used for the investigation of structure and the quantitative determination of substances in the fields of chemistry, physics, biology, medicine, and…
We have made the first interferomeric measurements of the wavelengths of the important ultraviolet diagnostic lines in the spectra \ion{C}{4} near 155 nm and \ion{Si}{4} near 139 nm with a vacuum ultraviolet Fourier transform spectrometer…
We have designed and constructed a ``dispersed Fourier Transform Spectrometer'' (dFTS), consisting of a conventional FTS followed by a grating spectrometer. By combining these two devices, we negate a substantial fraction of the sensitivity…