Related papers: A parylene coating system specifically designed fo…
We demonstrate ink-jet printing as a viable method for large area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-Methylpyrrolidone. We use it to print thin-film transistors,…
Supercapacitors, based on the fast ion transportation, are specialized to provide high power, long stability, and efficient energy storage with highly porous electrode materials. However, their low energy density and specific capacitance…
We have developed a compact cryogenic system with a pulse tube refrigerator and a coaxial heat exchanger. This liquefaction-purification system not only saves the cooling power used to reach high gaseous recirculation rate, but also reduces…
The authors have shown that nanogranular indium tin oxide (ITO) films, deposited by spray pyrolysis on silicon substrate, demonstrate ultralow thermal conductivity ~ 0.84 +/-0.12 Wm-1K-1 at room temperature. This value is approximately by…
Thin-film transistors composed of a hydrogen-containing indium oxide active layer are promising candidates for backplane devices in next-generation flat panel displays, offering higher definition and faster operation. However, the hydrogen…
Optical absorbers find uses in a wide array of applications across the electromagnetic spectrum, including photovoltaic and photochemical cells, photodetectors, optical filters, stealth technology, and thermal light sources. Recent efforts…
The thermal properties of solids under nanoscale confinement are currently not understood at the atomic level. Recent numerical studies have highlighted the presence of a minimum in the thermal conductivity as a function of thickness for…
We present a 3D-printing-based design to produce wire-guided liquid microfilms that can be used for versatile spectroscopic applications. We demonstrate the ability of our instrument to provide optically useful liquid microfilms with highly…
Nanophotonic circuits based on polished diamond thin films are prepared. These circuits cover a wide wavelength range across the entire visible spectrum. Integrated devices are surface functionalized site-specifically and in parallel using…
The Deep Underground Neutrino Experiment (DUNE) Phase-II Far Detector is considering an approximately 2000\,m$^2$ photon detection system to achieve a target mean light yield of 180\,PE/MeV. Meeting this requirement demands scalable,…
Realizing laterally continuous ultra-thin gold films on transparent substrates is a challenge of significant technological importance. In the present work, formation of ultra-thin gold films on fused silica is studied, demonstrating how…
Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying…
A light, compact optical isolator using an atomic vapor in the hyperfine Paschen-Back regime is presented. Absolute transmission spectra for experiment and theory through an isotopically pure 87Rb vapor cell show excellent agreement for…
NbO2 is a potential material for nanometric memristor devices, both in the amorphous and the crystalline form. We fabricated NbO2 thin films using RF-magnetron sputtering from a stoichiometric target. The as-deposited films were amorphous…
We establish the use of dielectrophoresis for the directed parallel assembly of individual flakes and nanoribbons of few-layer graphene into electronic devices. This is a bottom-up approach where source and drain electrodes are…
A very efficient method for the calculation of the effective optical response of nano-structured composite systems allows the design of metamaterials tailored for specific optical polarization properties. We use our method to design 2D…
Modern optical systems are subject to very restrictive performance, size and cost requirements. Especially in portable systems size often is the most important factor, which necessitates elaborate designs to achieve the desired…
We demonstrate a selectively emitting optical Fabry-P\'erot resonator based on a few-nm-thin continuous metallic titanium nitride film, separated by a dielectric spacer from an optically thick titanium nitride back-reflector, which exhibits…
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the…
The paper reports on a high precision equipment designed to modify over 3-dimensions (3D) by means of high-energy gold ions the local properties of thin and thick films. A target-moving system aimed at creating patterns across the volume is…