Related papers: Compressive performance and crack propagation in A…
The potentiality of composition graded AlMgSi wires for optimized combination of electrical conductivity and torsion strength has been investigated. Composition graded wires were obtained by co-drawing commercially pure Al with an AlMgSi…
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of…
In this paper, compressive loading effects on the plasticity of Al-Cu alloy varying the crystal orientation of Al and alloying element (Cu) percentage are investigated using molecular dynamics approach. The alloying percentage of Cu are…
Materials with negative Poisson ratio have the counter-intuitive property of expanding laterally when they are stretched longitudinally. They are accordingly termed auxetic, from the Greek auxesis meaning to increase. Experimental studies…
Microstructure-property relationships of resistance spot welded 6061-T6 aluminum alloy lap joints were investigated via mechanical testing and microscopy techniques. Quasi-static tensile and novel shear punch tests were employed to measure…
An age-hardenable Al-Cu-Mg alloy (A2024) was processed by high-pressure torsion (HPT) for producing an ultrafine-grained structure. The alloy was further aged for extra strengthening. The tensile strength then reached a value as high as ~1…
Microstructural features and mechanical properties of an Al-Mg-Si alloy processed by high-pressure torsion have been investigated using transmission electron microscopy, X-ray diffraction, three-dimensional atom probe, tensile tests and…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
Nano-scale eutectics, such as rapid solidified Al-Si, exhibit enhanced yield strength and strain hardening but plasticity is limited by cracking of the hard phase (Si). Mechanisms that may suppress cracking and enable plastic co-deformation…
Brittle solids are often toughened by adding a second-phase material. This practice often results in composites with material heterogeneities on the meso scale: large compared to the scale of the process zone but small compared to that of…
Traditional computational approaches in simulating crack propagation in perfectly brittle materials rely on the estimate of stress intensity factors along the rupture front. This proves highly challenging in 3D when the crack geometry…
Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys…
The temporal evolution of ordered gamma prime (L12)-precipitates precipitating in a disordered gamma(f.c.c.) matrix is studied in extensive detail for a Ni-12.5 Al at.% alloy aged at 823 K (550 oC), for times ranging from 0.08 to 4096 h.…
Compared to traditional superhard materials with high electron density and strong covalent bonds, alloy materials mainly composed of metallic bonding structures typically have great toughness and lower hardness. Breaking through the limits…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…
The results of characterization of TiAlSiON hard coatings deposited on ferric-chromium AISI 430 stainless steel by plasma enhanced magnetron sputtering are presented. The coating with maximum hardness (of 45 GPa) was obtained at the…
MAX phases are used on an industrial scale in the transportation, armour, and furnace development sectors, among others. However, data on the dynamical properties of these materials under varying temperature and pressure conditions are rare…
We study the acoustic emission avalanches during the failure process of porous alumina samples (Al2O3) under compression. Specimens with different porosities ranging from 30% to 59% have been synthetized from a mixture of fine-grained…
We explore a material design strategy to optimize the thermoelectric power factor. The approach is based on screening the band structure changes upon a controlled volume change. The methodology is applied to the binary silicides and…
Understanding crack tip - dislocation interaction is critical for improving the fracture resistance of semi-brittle materials like room-temperature plastically deformable ceramics. Here, we use a modified double cleavage drilled compression…