Related papers: Composite stacks for reliable > 17 T trapped field…
The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-\delta}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a…
High temperature superconducting (HTS) tape can be cut and stacked to generate large magnetic fields at cryogenic temperatures after inducing persistent currents in the superconducting layers. A field of 17.7 T was trapped between two…
A trapped field of over 1 T at 5 K and 0.5 T at 20 K has been measured between a stack of magnetized cylinders of bulk polycrystalline Ba0.6K0.4Fe2As2 superconductors 10 mm in diameter and 18 mm in combined thickness. The trapped field…
Improved trapped fields are reported for bulk melt-textured YBa2Cu3O7-x (YBCO) material in the temperature range between 20 K and 50 K. Trapped fields up to 12.2 T were obtained at 22 K on the surface of single YBCO disks (with Ag and Zn…
We fabricated a compact (13$\times$12$\times$12.5 mm${^3}$) trapped-field magnet by stacking 200 pieces of EuBa${_2}$Cu${_3}$O${_7}$ coated conductors with BaHfO${_3}$ nanorods as artificial pinning centers. It was magnetized by…
Superconducting bulk (RE)Ba$_2$Cu$_3$O$_{7-x}$ materials (RE-rare earth elements) have been successfully used to generate magnetic flux densities in excess of 17 T. This work investigates an alternative approach by trapping flux in stacks…
We have developed disk-shaped MgB2 bulk superconducting magnets (20, 30 mm in diameter, 10 mm in thickness) using the in-situ process from Mg and B powders and evaluated the temperature dependence of trapped magnetic field. A pair of two…
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a…
The ability of stacks of superconducting tapes to trap large magnetic fields makes them ideal candidates for creating powerful permanent magnets of compact size and mass. Experimentally, several techniques are used to trap the maximum…
Superconducting stacks and bulks can act as very strong magnets (more than 17 T), but they lose their magnetization in the presence of alternating (or ripple) transverse magnetic fields, due to the dynamic magneto-resistance. This…
High temperature superconducting (HTS) bulks or stacks of coated conductors (CCs) can be magnetized to become trapped field magnets (TFMs). The magnetic fields of such TFMs can break the limitation of conventional magnets (<2 T), so they…
Uniform dipole magnetic fields from 1.9 to 22.4 kOe were permanently trapped, with high fidelity to the original field, transversely to the axes of hollow Nb3Sn superconducting cylinders. These cylinders were constructed by helically…
The distributions of the magnetic field and temperature in a superconducting-disk magnetized by pulse field, and the levitation force between this disk and a permanent magnet are calculated from first principles. The calculation is based…
A trapped magnetic field of greater than 3 T has been achieved in a single grain GdBa2Cu3O7-{\delta} (GdBaCuO) bulk superconductor of diameter 30 mm by employing pulsed field magnetisation (PFM). The magnet system is portable and operates…
Recent discoveries of superconductivity in hydrogen-rich compounds stabilized by high pressures have shown that a critical temperature of superconductivity Tc can reach near room temperature values. The current studies focus on the search…
The magnetization of ReBCO tape stacks and tape stack cables in high magnetic fields (up to 30 T) are not commonly reported. Here we report magnetization measurements of tape stack cables in magnetic fields up to 30 T at 4.2 K. We observed…
The Twisted Stacked-Tape Cable (TSTC) is one of the major high temperature superconductor cable concepts combining scalability, ease of fabrication and high current density making it a possible candidate as conductor for large scale…
High-temperature conventional superconductivity in hydrogen-rich materials under high pressure has been reportedly found in twelve different compounds in recent years. However, the experimental evidence on which these claims are based has…
The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…
The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is…