Related papers: Plate-like precipitate effects on plasticity of Al…
The continuous miniaturization of modern electromechanical systems calls for a comprehensive understanding of the mechanical properties of metallic materials specific to micrometer and sub-micrometer scales. At these scales, the nature of…
The influence of different types of precipitates (either Guinier-Preston zones, $\theta''$ or $\theta'$) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al - 4 wt. \%…
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $\theta'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out…
The deformation behaviour of the intermetallic Al$_{2}$Cu-phase was investigated using atomistic simulations and micropillar compression, where slip on the unexpected {211} and {022} slip planes was revealed. Additionally, all possible slip…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…
The interaction between dislocations and precipitates plays an important role in the mechanical behavior of alloys. To provide more insight into the physics of this interaction, this research analyzes short-range interactions of an edge…
Platelet array linear complexions have been predicted in Al-Cu, with notable features being dislocation faceting and climb into the precipitate, both of which should impact plasticity. In this study, we examine the strain rate dependence of…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
The Fe-Cu system has attracted much attention over the last several decades due to its technological importance as a model alloy for Cu steels. In spite of these efforts several aspects of its phase diagram remain unexplained. Here we use…
The plastic deformation mechanisms of tungsten carbide at room and elevated temperatures influence the wear and fracture properties of WC-Co hardmetal composite materials. The relationship between residual defect structures, including…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
\theta' (Al2Cu) precipitates in Al-Cu-Ag alloys were examined using high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). The precipitates nucleated on dislocation loops on which assemblies of {\gamma}'…
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and…
Slip transmission across $\alpha-\beta$ interfaces is of great significance in understanding the strength of $\alpha-\beta$ Ti alloys for aerospace applications. Molecular statics (MS) and molecular dynamics (MD) simulations were conducted…
The {\mu}-phase is a common precipitation phase in superalloys and it exists in a wide composition and temperature range. As such, we study the influences of composition and temperature on its plasticity by micropillar compression tests and…
The investigation of the deformation behaviour of intermetallic phases is mostly limited to high temperatures due to their low ductility at ambient temperature. Therefore, within this study, nanoindentation experiments on the Al$_{2}$Cu…
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of {\theta}' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the…
The mechanical properties of Mg-Al alloys are greatly influenced by the complex intermetallic phase Mg$_{17}$Al$_{12}$, which is the most dominant precipitate found in this alloy system. The interaction of basal edge and 30$^\text{o}$…
Matallic alloys, such as Al or Cu, or mild steel, display plastic instabilities in a well defined range of temperatures and deformation rates, a phenomenon known as the Portevin-Le Chatelelier (PLC) effect. The stick-slip behavior, or…