Related papers: Design and testing of a bunch-by-bunch beam positi…
Superconducting RF (SRF) photo-injectors are one of the most promising devices for generating continuous wave (CW) electron beams with record high brightness. Ultra-high vacuum of SRF guns provides for long lifetime of the high quantum…
A new bunch length measurement method based on high order mode cavity was proposed. Operating the harmonic cavity at mode TM0n0 so that its radius could be chosen, in order to break the limitation of beam pipe radius. A two-cavity bunch…
KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW…
A new generation of storage ring-based light source, called diffraction-limited storage ring (DLSR), with emittance approaching the diffraction limit for multi-keV photons by means of multi-bend achromat lattice, has attracted worldwide and…
In any hadron synchrotron, the half-integer resonance is among the strongest effects limiting the achievable maximum beam intensity. The heavy-ion superconducting synchrotron SIS100, currently under construction at GSI, should provide…
The China initiative Accelerator Driven System, CiADS, physics design adopts $162.5 \,\mathrm{MHz}$, $325 \,\mathrm{MHz}$, and $650 \,\mathrm{MHz}$ cavities, which are driven by the corresponding radio frequency (RF) power system, requiring…
A 3.8ps root mean square (RMS) time synchronization implemented in a 20nm fabrication process ultrascale kintex Field Programmable Gate Array (FPGA) is presented. The multichannel high-speed serial transceivers (e.g. GTH) play a key role in…
This letter proposes a new design of frequency-locked loop (FLL) which is based on synchronous (dq) reference frame instead of stationary ({\alpha}\b{eta}) reference frame. First, a synchronous reference frame FLL (briefly called SRF-FLL0)…
A means for non-invasive measurement of transverse and longitudinal characteristics of bunched beams in synchrotrons has been developed based on high sensitivity slotted waveguide pickups. The pickups allow for bandwidths exceeding hundreds…
The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…
Multi-cell coordinated beamforming (MCBF), where multiple base stations (BSs) collaborate with each other in the beamforming design for mitigating the inter-cell interference, has been a subject drawing great attention recently. Most MCBF…
In an accelerator, the nonlinear behavior near a horizontal resonance line ($n\nu_x$) usually involves the appearance of stable fixed points (SFPs) in the horizontal phase space, also referred to as transverse resonance island ``buckets"…
The fast-rising demand for wireless bandwidth requires rapid evolution of high-performance baseband processing infrastructure. Programmable many-core processors for software-defined radio (SDR) have emerged as high-performance baseband…
To improve signal-to-interference ratio (SIR) and make better use of file diversity provided by random caching, we consider two types of linear receivers, i.e., maximal ratio combining (MRC) receiver and partial zero forcing (PZF) receiver,…
KTX (Keda Tours eXperiment) is a new RFP (reversed field pinch) device at the University of Science and Technology of China. The unique double-C design of the KTX makes modifications and investigations of power and particle control easy,…
Optical microcavities with rotational symmetry have been widely used for narrowing linewidth and reducing frequency noise, however, the narrow but wavelength dependent optical feedback restricts the narrow linewidth laser works only at some…
Step-frequency radar (SFR) is a high resolution radar approach, where multiple pulses are transmitted at different frequencies, covering a wide spectrum. The obtained resolution directly depends on the total bandwidth used, or equivalently,…
Enhanced-SSFM digital backpropagation (DBP) is experimentally demonstrated and compared to conventional DBP. A 112 Gb/s PM-QPSK signal is transmitted over a 3200 km dispersion-unmanaged link. The intradyne coherent receiver includes…
For the future intensity increase of the fixed-target beams in the CERN accelerator complex, a barrier-bucket scheme has been developed to reduce the beam loss during the 5-turn extraction from the PS towards the SPS, the so-called…
A 20 GHz LLRF system is being built using a two-board(RF Front End + ADC/DAC/FPGA) architecture. The RF Front End provides 8 down-converting channels and 3 up-converting channels (5.5-20 GHz RF to 0.05-3 GHz IF). Separate, phase locked,…