Related papers: LINS: A Lidar-Inertial State Estimator for Robust …
Accurate odometry is a critical component in a robotic navigation stack, and subsequent modules such as planning and control often rely on an estimate of the robot's motion. Sensor-based odometry approaches should be robust across sensor…
Achieving efficient and consistent localization a prior map remains challenging in robotics. Conventional keyframe-based approaches often suffers from sub-optimal viewpoints due to limited field of view (FOV) and/or constrained motion, thus…
In this paper, we propose LIR-LIVO, a lightweight and robust LiDAR-inertial-visual odometry system designed for challenging illumination and degraded environments. The proposed method leverages deep learning-based illumination-resilient…
Odometry in adverse weather conditions, such as fog, rain, and snow, presents significant challenges, as traditional vision and LiDAR-based methods often suffer from degraded performance. Radar-Inertial Odometry (RIO) has emerged as a…
To achieve robust and accurate state estimation for robot navigation, we propose a novel Visual Inertial Odometry(VIO) algorithm with line features upon the theory of invariant Kalman filtering and Cubature Kalman Filter (CKF). In contrast…
This paper introduces 2Fast-2Lamaa, a lidar-inertial state estimation framework for odometry, mapping, and localization. Its first key component is the optimization-based undistortion of lidar scans, which uses continuous IMU preintegration…
The rapid development of autonomous driving and mobile mapping calls for off-the-shelf LiDAR SLAM solutions that are adaptive to LiDARs of different specifications on various complex scenarios. To this end, we propose MULLS, an efficient,…
This paper proposes an $SE_2(3)$ based extended Kalman filtering (EKF) framework for the inertial-integrated state estimation problem. The error representation using the straight difference of two vectors in the inertial navigation system…
The main contribution of this paper is a high frequency, low-complexity, on-board visual-inertial odometry system for quadrotor micro air vehicles. The system consists of an extended Kalman filter (EKF) based state estimation algorithm that…
Autonomous vehicles and wheeled robots are widely used in many applications in both indoor and outdoor settings. In practical situations with limited GNSS signals or degraded lighting conditions, the navigation solution may rely only on…
The LiDAR and inertial sensors based localization and mapping are of great significance for Unmanned Ground Vehicle related applications. In this work, we have developed an improved LiDAR-inertial localization and mapping system for…
Autonomous navigation is one of the main enabling technologies for future space missions. While conventional spacecraft are navigated through ground stations, their employment for deep-space CubeSats yields costs comparable to those of the…
LiDAR sensors can provide dependable 3D spatial information at a low frequency (around 10Hz) and have been widely applied in the field of autonomous driving and UAV. However, the camera with a higher frequency (around 20Hz) has to be…
This work describes the implementation of a simple and computationally efficient Intelligent Navigation System (INS) for autonomous systems used in areas where human access is impossible. The system uses Laser Range Finder (LRF) readings as…
Autonomous mobile robots operating in novel environments depend critically on accurate state estimation, often utilizing visual and inertial measurements. Recent work has shown that an invariant formulation of the extended Kalman filter…
Odometry estimation using light detection and ranging (LiDAR) and an inertial measurement unit (IMU), known as LiDAR-inertial odometry (LIO), often suffers from performance degradation in degenerate environments, such as long corridors or…
In recent years, thanks to the continuously reduced cost and weight of 3D Lidar, the applications of this type of sensor in robotics community have become increasingly popular. Despite many progresses, estimation drift and tracking loss are…
We present Multi-Layer Intensity Map, a novel 3D object representation for robot perception and autonomous navigation. Intensity maps consist of multiple stacked layers of 2D grid maps each derived from reflected point cloud intensities…
Our goal is to send legged robots into challenging, unstructured terrains that wheeled systems cannot traverse. Moreover, precise estimation of the robot's position and orientation in rough terrain is especially difficult. To address this…
This paper investigates the problem of inertial navigation system (INS) filter design through the lens of symmetry. The extended Kalman filter (EKF) and its variants have been the staple of INS filtering for 50 years. However, recent…