Related papers: Frequency response of time-delay interferometry fo…
In an effort to eliminate laser phase noise in laser interferometer spaceborne gravitational wave detectors, several combinations of signals have been found that allow the laser noise to be canceled out while gravitational wave signals…
The Laser Interferometer Space Antenna (LISA) is a European Space Agency mission that aims to measure gravitational waves in the millihertz range. The three-spacecraft constellation forms a nearly-equilateral triangle, which experiences…
We report on the first demonstration of time-delay interferometry (TDI) for LISA, the Laser Interferometer Space Antenna. TDI was implemented in a laboratory experiment designed to mimic the noise couplings that will occur in LISA. TDI…
LISA is a joint space mission of the ESA and NASA for detecting low frequency gravitational radiation in the band $10^{-5} - 1$ Hz. In order to attain the requisite sensitivity for LISA, the laser frequency noise must be suppressed below…
Spaceborne gravitational-wave observatories utilize a postprocessing technique known as time-delay interferometry (TDI) to reduce the otherwise overwhelming laser frequency noise by around 8 orders of magnitude. While, in its traditional…
In this work, we have built an experimental setup to simulate the clock noise transmission with two spacecrafts and two optical links, and further demonstrated the extraction of picometer level signal drowned by the large laser frequency…
Time-delay interferometry (TDI) suppresses laser frequency noise by forming linear combinations of time-shifted interferometric measurements. The time-shift operation is implemented by interpolating discretely sampled data. To enable…
Time-delay interferometry (TDI) is essential for suppressing laser frequency noise in space-based gravitational wave (GW) observatories such as LISA. However, current second-generation TDI schemes often exhibit undesirable null frequencies…
Time-Delay Interferometry (TDI) is the data processing technique needed for generating interferometric combinations of data measured by the multiple Doppler readouts available onboard the three LISA spacecraft. Within the space of all…
Raw space-based gravitational-wave data like LISA's phase measurements are dominated by laser frequency noise. The standard technique to make this data usable for science is time-delay interferometry (TDI), which cancels laser noise terms…
Time-delay interferometry (TDI) is a processing step essential for the scientific exploitation of LISA, as it reduces the otherwise overwhelming laser noise in the interferometric measurements. The fundamental idea is to define new…
The LISA mission will likely be a signal dominated detector, such that one challenge is the separation of the different astrophysical sources, and to distinguish between them and the instrumental noise. One of the goals of LISA is to probe…
Time-delay interferometry is put forward to improve the signal-to-noise ratio of space-borne gravitational wave detectors by canceling the large laser phase noise with different combinations of measured data. Based on the Michelson data…
Proper tuning of the orbital characteristics of the three spacecrafts that constitute the usual triangular configuration of the space-borne gravitational-wave detector LISA, could minimize the breathing mode of its arm-lengths. Since the…
Laser frequency noise suppression is a critical requirement for the Laser Interferometer Space Antenna (LISA) mission to detect gravitational waves. The baseline laser stabilization is achieved using cavity pre-stabilization and a…
Time delay interferometry (TDI) is essential for suppressing laser frequency noise and achieving the targeted sensitivity for space-borne gravitational wave (GW) missions. In Paper I, we examined the performance of the fiducial…
LISA will detect gravitational waves (GWs) in the milli-Hz frequency band in space. Time-delay interferometry (TDI) is developed to suppress laser frequency noise beneath the acceleration noise and optical metrology noise. To identify…
LISA is an upcoming ESA mission that will detect gravitational waves in space by interferometrically measuring the separation between free-falling test masses at picometer precision. To reach the desired performance, LISA will employ the…
Previous work demonstrated effective laser frequency noise (LFN) suppression for Laser Interferometer Space Antenna (LISA) data from raw phasemeter measurements using a Markov Chain Monte Carlo (MCMC) algorithm with fractional delay…
TianQin is a proposed geocentric space-based gravitational wave observatory mission, which requires time-delay interferometry (TDI) to cancel laser frequency noise. With high demands for precision, solar-wind plasma environment at $\sim…