Related papers: Drop Impact on Two-Tier Monostable Superrepellent …
When a liquid drops impinges a hydrophobic rough surface it can either bounce off the surface (fakir droplets) or be impaled and strongly stuck on it (Wenzel droplets). The analysis of drop impact and quasi static ''loading'' experiments on…
When placed on rough hydrophobic surfaces, water droplets of diameter larger than a few millimeters can easily form pearls, as they are in the Cassie-Baxter state with air pockets trapped underneath the droplet. Intriguingly, a natural…
The paper reports on the comparison of the wetting properties of super-hydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and…
Because the superhydrophobic characteristic appears by forming a composite surface consisting of solid and air underneath the droplets, a large number of rough surfaces that can trap air have been fabricated. Recently, the air trapping on…
Ambient air cushions the impact of drops on solid substrates, an effect usually revealed by the entrainment of a bubble, trapped as the air squeezed under the drop drains and liquid-solid contact occurs. The presence of air becomes evident…
A liquid in contact with a textured surface can be found in two states, Wenzel and Cassie. In the Wenzel state the liquid completely wets the corrugations while in the Cassie state the liquid is suspended over the corrugations with air or…
This paper reports the dynamic wetting behavior and heat transfer characteristics for impinging droplets on heated bi-phobic surfaces (superhydrophobic matrix with hydrophobic spots). A non-patterned superhydrophobic and a sticky…
Droplets coalescing on a superhydrophobic surface exhibit coalescence-induced droplet jumping. However, water vapor condensing on a superhydrophobic surface can result in simultaneous formation of condensate droplets with two distinct…
We consider theoretically the Cassie-Baxter and Wenzel states describing the wetting contact angles for rough substrates. More precisely, we consider different types of periodic geometries such as square protrusions and disks in 2D, grooves…
A falling liquid drop, after impact on a rigid substrate, deforms and spreads, owing to the normal reaction force. Subsequently, if the substrate is non-wetting, the drop retracts and then jumps off. As we show here, not only is the impact…
Drops deposited on rough and hydrophobic surfaces can stay suspended with gas pockets underneath the liquid, then showing very low hydrodynamic resistance. When this superhydrophobic state breaks down, the subsequent wetting process can…
Droplet impact in airflow environments is ubiquitous in nature and industry, making the understanding of this multiphase behavior crucial for technologies such as anti-icing and spray cooling. In this study, the dynamics of droplet impact…
We experimentally investigate drop impact dynamics onto different superhydrophobic surfaces, consisting of regular polymeric micropatterns and rough carbon nanofibers, with similar static contact angles. The main control parameters are the…
Water condensation on superhydrophobic surfaces can generate spontaneous droplet jumping, enabling rapid condensate removal and improved thermal and mass transfer. Although this effect has been extensively demonstrated on densely packed…
A liquid drop impacting a dry solid surface with sufficient kinetic energy will splash, breaking apart into numerous secondary droplets. This phenomenon shows many similarities to forced wetting, including the entrainment of air at the…
The characterization of the wetting on superhydrophobic surfaces is rather complex. Usual contact angle experiments are difficult to perform and the lateral movement of droplets as well as the pinning at point defects on the surface can…
The quality of a liquid-repellent surface is quantified by both the apparent contact angle $\theta_0$ that a sessile drop adopts on it, and the value of the liquid pressure threshold the surface can withstand without being impaled by the…
The effect of pitch of the pillars and impact velocity are studied for the impact dynamics of a microliter water droplet on a micropillared hydrophobic surface. The results are presented qualitatively by the high-speed photography and…
During coalescence of liquid drops contacting a solid, the liquid sweeps wetted and solid-projected areas. The extent of sweeping dictates the performance of devices such as self-cleaning surfaces, anti-frost coatings, water harvesters, and…
Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical…