Related papers: An Analytical Model for CBAP Allocations in IEEE 8…

In this paper, a new technique for cross layer design, based on present Eb/N0 (bit energy per noise density) ratio of the connections and target values of the Quality of Service (QoS) information parameters from MAC layer, is proposed to…

In low power wireless sensor networks, MAC protocols usually employ periodic sleep/wake schedule to reduce idle listening time. Even though this mechanism is simple and efficient, it results in high end-to-end latency and low throughput. On…

IEEE 802.11 is a widely used wireless LAN standard which offers a good bandwidth at low cost In an ESS, multiple APs can co-exist with overlapping coverage area. A mobile node connects to the AP from which it receives the best signal.…

This paper addresses the problem of averaging numbers across a wireless network from an important, but largely neglected, viewpoint: bandwidth/energy efficiency. We show that existing distributed averaging schemes have several drawbacks and…

The next generations of mobile networks will be deployed as ultra-dense networks, to match the demand for increased capacity and the challenges that communications in the higher portion of the spectrum (i.e., the mmWave band) introduce.…

The purpose of this paper is to analyze the so-called back-off technique of the IEEE 802.11 protocol in broadcast mode with waiting queues. In contrast to existing models, packets arriving when a station (or node) is in back-off state are…

Dynamic Channel Bonding (DCB) allows for the dynamic selection and use of multiple contiguous basic channels in Wireless Local Area Networks (WLANs). A WLAN operating under DCB can enjoy a larger bandwidth, when available, and therefore…

Millimeter wave (mmWave) communication systems use large number of antenna elements that can potentially overcome severe channel attenuation by narrow beamforming. Narrow-beam operation in mmWave networks also reduces multiuser…

The recently ratified IEEE 802.11e standard defines the Enhanced Distributed Channel Access (EDCA) function for Quality-of-Service (QoS) provisioning in the Wireless Local Area Networks (WLANs). The EDCA uses Carrier Sense Multiple Access…

M2M communications are projected to be one of the fastest growing technology segments of the IT sector in the next years. Sensor and actuator networks connect communication machines and devices so that they automatically transmit…

Network coding is an effective idea to boost the capacity of wireless networks, and a variety of studies have explored its advantages in different scenarios. However, there is not much analytical study on throughput and end-to-end delay of…

IEEE 802.11be (Wi-Fi 7) introduces a new concept called multi-link operation (MLO), which allows multiple Wi-Fi interfaces in different bands (2.4, 5, and 6 GHz) to work together to increase network throughput, reduce latency, and improve…

Unmanned aerial vehicles (UAVs) have played an important role in air-ground integration network. Especially in Internet of Things (IoT) services, UAV equipped with communication equipments is widely adopted as a mobile base station (BS) for…

The communication at mmWave frequencies is a promising enabler for ultra high data rates in the next generation of mobile cellular networks (5G). The harsh propagation environment at such high frequencies, however, demands a dense base…

The challenge of designing an efficient Medium Access Control (MAC) protocol and analyzing it has been an important research topic for over 30 years. This paper focuses on the performance analysis (through simulation) and modification of a…

Focusing on the increasing market of the sensors and actuators networks, the IEEE 802.11ah Task Group is currently working on the standardization of a new amendment. This new amendment will operate at the sub-1GHz band, ensure transmission…

We propose a linear model of the throughput of the IEEE 802.11 Distributed Coordination Function (DCF) protocol at the data link layer in non-saturated traffic conditions. We show that the throughput is a linear function of the packet…

Wireless networks have become the main form of Internet access. Statistics show that the global mobile Internet penetration should exceed 70\% until 2019. Wi-Fi is an important player in this change. Founded on IEEE 802.11, this technology…

As a result of the recent advances in physical (PHY) layer communication techniques, it is possible to receive multiple packets at the receiver concurrently. This capability of a receiver to decode multiple simultaneous transmissions is…

Mobility scenarios involving short contact times pose a challenge for high bandwidth data transfer between autonomous vehicles and roadside base stations (BS). Millimeter wave bands are a viable solution as they offer enormous bandwidth in…