Related papers: Upmost efficiency, few-micron-sized midwave infrar…
A new dielectric Fabry-Perot cavity was designed for a resonant enhancing optical absorption by a thin absorber layer embedded into the cavity. In this cavity, the front mirror is a subwavelength grating with $\sim 100$% retroreflection.…
We present the design, fabrication, and optical characterization of ultra-compact mid-wave infrared photodetector pixels. Our design relies on a guided mode resonance structure to confine incident mid-infrared light to the 250 nm-thick…
We design a polarization-sensitive resonator for use in midinfrared photodetectors, utilizing a photonic crystal cavity and a single or double-metal plasmonic waveguide to achieve enhanced detector efficiency due to superior optical…
The study proposes to use the photon trapping micro-structures to enhance quantum efficiency of the mid infrared photodetectors. The nanostructure that is consist of micro holes reduces reflection and bends the near normally incident light…
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength…
A resonant-cavity enhanced detector operating in the mid-infrared at a wavelength around 3.6 micron is demonstrated. The device is based on a narrow-gap lead salt heterostructure grown by molecular beam epitaxy. Below 140 K, the…
While advancing a physics-based comprehensive photodetector-simulation model, we propose a novel device design of the mid-wavelength infrared nBn photodetectors by exploiting the inherit flexibility of the $InAs_{1-x}Sb_{x}$ ternary alloy…
Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that…
Minimizing the material usage in thin-film solar cells can reduce manufacturing costs and enable mechanically flexible implementations, but concomitantly diminishes optical absorption. Coherent optical effects can help alleviate this…
Mid-infrared photodetectors are susceptible to background noise since every object in the surroundings emits thermal radiation from different directions. To reduce this background noise and enhance signal-to-noise ratio of mid-infrared…
In this paper several designs to maximize the absorption efficiency of superconducting-nanowire single-photon detectors are investigated. Using a simple optical cavity consisting of a gold mirror and a SiO2 layer, the absorption efficiency…
We demonstrate thin-film metamaterials with resonances in the mid-infrared wavelength range. Our structures are numerically modeled and experimentally characterized by reflection and angularly-resolved thermal emission spectroscopy. We…
In this work we propose a microwave photon detector which successfully reaches 100% efficiency with only one absorber. Our design consists of a metastable quantum circuit coupled to a semi-infinite transmission line which performs highly…
A nearly omni-directional THz absorber for both transverse electric (TE) and transverse magnetic (TM) polarizations is proposed. Through the excitation of magnetic polariton in a metal-dielectric layer, the incident light is perfectly…
In integrated photonics, specific wavelengths are preferred such as 1550 nm due to low-loss transmission and the availability of optical gain in this spectral region. For chip-based photodetectors, layered two-dimensional (2D) materials…
In this paper we propose a novel design approach for an ultrathin metasurface energy harvester based on a surrogate model of dipole antenna. A significant advantage of this idea is the reduction of the time of the design process retrieved…
Semiconducting 2D materials, such as molybdenum disulfide (MoS2) and other members of the transition metal dichalcogenide family, have emerged as promising materials for applications in high performance nanoelectronics that exhibit…
On-chip integration of two-dimensional (2D) materials offers great potential for the realization of novel optoelectronic devices in different photonic platforms. In particular, indium selenide (InSe) is a very promising 2D material due to…
Single-photon detection via absorption in current-biased nanoscale superconducting structures has become a preferred technology in quantum optics and related fields. Single-mode fiber packaged devices have seen new records set in detection…
Silicon photonics is being extended from the near-infrared (near-IR) window of 1.3-1.5 {\mu}m for optical fiber communications to the mid-infrared (mid-IR) wavelength-band of 2 {\mu}m or longer for satisfying the increasing demands in many…