Related papers: Recycling of SmCo5 magnets by HD process
Spark plasma sintering (SPS) technique is applied in combination with hydrogen decrepitation process for the recycling of SmCo5 magnets. The SmCo5 magnets for recycling were first decrepitated by hydrogen gas of a pressure of 4 bar for 3…
In light of recent improvements in the theory of rare earth magnets, as well as the availability of improved neutron powder diffraction data on these materials, we revisit the magnetic single-ion properties of SmCo$_5$ and the magnetic…
Here, we investigated the influence of grain formation on the magnetization reversal of SmCo5/Co at low temperature. A set of SmCo5/Co bi-layer samples were fabricated under identical conditions on MgO(100) and glass substrates with a Cr…
Solid state-refrigerants have generated worldwide interest owing to their growing potential for use in efficient and green cooling devices. Caloric effects could be obtained by manipulating their degrees of freedom such as magnetization,…
The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly…
With an annual production amounting to 800 kilotons, ferrite magnets constitute the largest family of permanent magnets in volume, a demand that will only increase as a consequence of the rare-earth crisis. With the global goal of building…
The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their…
We report on the anomalous magnetization reversal under hydrostatic pressure in the lightly electron-doped manganite compound (Ca$_{1-x}$Sr$_{x}$)Mn$_{0.95}$Sb$_{0.05}$O$_{3}$ with its fixed carrier content. In a weakly magnetic field…
New ternary Mg-Ni-Mn intermetallics have been successfully synthesized by High Energy Ball Milling (HEBM) and have been studied as possible materials for efficient hydrogen storage applications. The microstructures of the as-cast and milled…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
The polycrystalline Mn1.26Fe0.60P0.48Si0.52 microwires were successfully fabricated for the first time by the melt-extraction technique, and their magnetic and magnetocaloric properties were investigated systematically. The structural…
We have conducted precise magnetization measurements down to 0.5 K with a miniature 3He cryostat and a closed-cycle 3He gas handling system for a commercial superconducting quantum interference device magnetometer [Magnetic Property…
High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed…
We have successfully developed and tested a compact shielded superconducting (SSC) magnet with a FeCoV magnetic shield. This was developed for the PrNi$_5$ based nuclear demagnetization refrigerator which can keep temperatures below 1 mK…
A single-phase polycrystalline La0.5Ba0.5CoO3-d sample was synthesized by microwave irradiation within 20 minutes of processing time and its structural, magnetic, electrical, and magnetostrictive properties were investigated. While the…
The magnetocaloric effect in the quantum dipolar magnet Yb$_3$Ga$_5$O$_{12}$ is studied both for pure material and with non-magnetic substitution: (Yb$_{1-x}$Y$_x$)$_3$Ga$_5$O$_{12}$. Magnetization measurements have been performed on a…
Bulk samples of MgB2 have been formed by hot isostatic pressing (HIPping) of commercial powder at 100MPa and 950=B0C. The resulting material is 100% dense with a sharp superconducting transition at 37.5K. Microstructural studies have…
The present research work is focused on the effect of activation procedure on the hydrogen absorption-desorption properties of new rare earth transition metal compound based on Sm(Co0.6Fe0.2Zr0.16B0.04)7.5 composition. Crystal structure and…
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We…
Precursor powders of BaMg2-xCoxFe16O27 with (x = 0.0, 1.0, and 2.0) were prepared using high-energy ball milling, and the effects of chemical composition and sintering temperature on the structural and magnetic properties were investigated…