Related papers: Optimized Er/Yb fiber laser
We demonstrate two fully and tightly phase locked 750 MHz ytterbium (Yb) fiber frequency combs that are independently stabilized to a continuous wave (CW) laser with <1 rad RMS phase error. A bulk EOM and a single stack PZT are separately…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
This approach permits much finer adjustments of the beam direction and position when compared to other beam steering techniques of the same mechanical precision. This results in a much increased precision, accuracy and mechanical stability.…
A ytterbium doped silica optical fiber has been cooled by 18.4K below ambient temperature by pumping with 20W of 1035nm light in vacuum. In air, cooling by 3.6K below ambient was observed with the same 20W pump. The temperatures were…
The use of short lengths of large core phosphate glass fibre, doped with high concentrations of Er or Er:Yb represents an attractive route to achieving high power erbium doped fibre amplifiers (EDFAs) and lasers (EDFLs). With the aim of…
We discuss our recent progress in iimproving the phase noise of a semiconductor laser using self-injection locking of to a mode of a high-Q whispering gallery mode resonator. Locking efficiency is analyzed for semiconductor distributed…
The ultrashort pulse laser operation is crucially defined by engaging explicit modulators. Conventionally, they are laborious to incorporate into an all-fibre design or involve the design of sophisticated cavities. We exploit Thulium-doped…
In this article we report the fabrication of a diode-pumped Dy,Tb:LiLuF4 waveguide laser operating in the yellow region of the visible spectrum. The circular depressed-cladding waveguides have been fabricated by direct femtosecond laser…
We report mode-locked ~1550 nm output of transform-limited ~180 fs pulses from a large mode-area (diameter ~ 50 {\mu}m) guided-wave erbium fluorozirconate glass laser. The passively mode-locked oscillator generates pulses with 25 nm…
We present a laser frequency comb based upon a 250 MHz mode-locked erbium-doped fiber laser that spans more than 300 terahertz of bandwidth, from 660 nm to 2000 nm. The system generates 1.2 nJ, 70 fs pulses at 1050 nm by amplifying the 1580…
Mid-infrared fibre lasers are crucial for applications in spectroscopy, medical diagnostics, and environmental sensing, owing to their ability to interact with fundamental molecular vibrational bands. However, achieving stable ultrafast…
The results on amplifying either radially or azimuthally polarized light with a fiber amplifier are presented. Experimental results reveal that more than 85% polarization purity can be retained at the output even with 40dB amplification,…
Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…
External optical feedback via Rayleigh scattering from an integrated microresonator or an optical fiber has been demonstrated to significantly narrow the intrinsic linewidth of semiconductor lasers. Wavelength matching between the lasing…
We present a resonantly frequency-doubled tapered amplified semiconductor laser system emitting up to 2.6 W blue light at 400 nm. The output power is stable on both short and long timescales with 0.12% RMS relative intensity noise, and less…
A simple, robust, and efficient method to produce either radially or azimuthally polarized output beam from a fiber laser is presented. Experimental results reveal that polarization purity of 90% or better can be obtained.
We demonstrated a 967 nm diode end-pumped Er:GSGG laser operated at 2.794 Micrometer with spectrum width 3.6 nm in the continuous wave(CW) mode. The maximum output power of 440 mW is obtained at an incident pumping power of 3.4 W, which…
Using ultrafast laser inscription, we report the fabrication of a prototype three-dimensional 121-waveguide fan-out device capable of reformatting the output of a 120 core multicore fiber (MCF) into a one-dimensional linear array. When used…
We report the frequency stabilization of an erbium-doped fiber distributed-feedback laser using an all-fiber based Michelson interferometer of large arm imbalance. The interferometer uses a 1 km SMF-28 optical fiber spool and an acousto…
Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers…