Related papers: Optimized Er/Yb fiber laser
We report supercontinuum generation by launching femtosecond Yb fiber laser pulses into a tapered single-mode fiber of 3 um core diameter. A spectrum of more than one octave, from 550 to 1400 nm, has been obtained with an output power of…
We report the development of a tunable, low-noise, all-fiber, single-frequency, linearly polarized high-power master oscillator power amplifier operating over 20 nm, from 1017 nm down to 997 nm. Using Ytterbium highly-doped silica fiber…
Absolute output power optimization and performance of a near- to mid-infrared picosecond optical parametric oscillator (OPO) is studied at two high pump powers using a widely-tunable output coupling (OC) technique which provides 15% to 68%…
We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber…
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave…
We present an ultrafast fiber laser system delivering 4.6 W average power at 258 nm based on two-stage fourth-harmonic generation in beta barium borate (BBO). The beam quality is close to diffraction limited with an M2- value of 1.3 x 1.6.…
We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications…
We demonstrate a high-power narrow-linewidth ultraviolet (UV) laser system at 318.6 nm for direct 6S1/2-nP (n = 70 to 100) Rydberg excitation of cesium atoms. Based on commercial fiber lasers and efficient nonlinear frequency conversion…
We present the development of a high power fibre laser system to investigate its suitability for use in a transverse electron beam profile monitor i.e. a laserwire. A system capable of producing individual pulses up to $165.8 \pm 0.4 \mu$J…
Coherent beam combination is one promising way to overcome the power limit of one single laser. In this paper, we use a Multi-Plane Light Converter to combine 12 fibers at 1.03 micron with a phase locking setup. The overall loss measurement…
In this study, we revealed the impact of the pumping scheme, fiber length, pumping power, and reflectivity of the output fiber Bragg grating on the performance of a Tm^3+ -doped fiber laser (TDFL) operating at a wavelength of 1.72 \mu m.…
We demonstrate 14.3-attosecond timing jitter [integrated from 10 kHz to 94 MHz offset frequency] optical pulse trains from 188-MHz repetition-rate mode-locked Yb-fiber lasers. In order to minimize the timing jitter, we shorten the non-gain…
We report the construction and characterization of a narrow-linewidth laser system to interrogate the E2 clock transitions at 436 nm of ytterbium ions trapped in end-cap traps. The 871 nm seed laser at the fundamental frequency is…
Post-compression methods for ultrafast laser pulses typically face challenging limitations including saturation effects and temporal pulse break-up when large compression factors and broad bandwidths are targeted. To overcome these…
We report on a novel type of dual-wavelength fiber laser with a structured-core design inside silica glass, forming a spatial separation of the several core areas doped with ytterbium and erbium ions. We have optimised the key parameters of…
In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the…
We built a frequency-doubled laser for 87Rb laser cooling, from a Telecom fiber laser. Thanks to intense technological development, telecom fiber lasers exhibit outstanding properties regarding relative intensity noise and modulation…
An ultrafast fiber chirped-pulse amplification laser system based on coherent combination of 16 ytterbium-doped rod-type amplifiers is presented. It generates 10 mJ pulse energy at 1 kW average power and 120 fs pulse duration. A partially…
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber…
We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using…