Related papers: Meandering gate edges for breakdown voltage enhanc…

We present a novel p-GaN gate HEMT structure with reduced hole concentration near the Schottky interface by doping engineering in MOCVD, which aims at lowering the electric field across the gate. By employing an additional unintentionally…

A broad TCAD simulation analysis of a monolithic common drain bidirectional GaN HEMT was performed. We used gate-to-gate distances of 4 microns and 6 microns for the devices optimized with two field plates. The breakdown voltages were 675V…

High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…

In this work, single-layer intrinsic and fluorinated graphene were investigated as gate insertion layers in normally-OFF p-GaN gate HEMTs, which wraps around the bottom of the gate forming Ti/graphene/p-GaN at the bottom and Ti/graphene/…

Short-term reliability and robustness of 110 nm AlN/GaN HEMTs has been evaluated by means of off-state, semi-on state and on-state step stress tests on devices having different gate-drain distance, LGD. While breakdown voltages and critical…

The potential barrier between source and gate in HEMTs and between source and channel in MOSFET controls the current output and the velocity injection of electrons in the channel [1], [2]. In non self aligned structures the electric field…

In this paper, we propose a simulation-based novel Split-Gate Trench MOSFET structure with an optimized fabrication process to enhance power efficiency, switching speed, and thermal stability for high-performance semiconductor applications.…

We report Beta-AlGaO/Ga2O3 tri-gate heterostructure MOSHEMTs incorporating a thin 5 nm Al2O3 gate oxide layer for improved gate control and reduced leakage. The devices were fabricated on AlGaO/GaO heterostructures grown by ozone MBE on…

Gallium Oxide (Ga2O3) has a huge potential on the power device for its high breakdown filed and good transport properties. beta-Ga2O3 as the thermodynamics stable phase, has been demonstrated to form high electron mobility transistor (HEMT)…

In this work, we propose a new Stepped Oxide Hetero-Material Trench (SOHMT) power MOSFET with three sections in the trench gate (an N+ poly gate sandwiched between two P+ poly gates) and having different gate oxide thicknesses (increasing…

A high threshold voltage enhancement-mode GaN HEMT with p-type doped buffer is discussed and simulated. Analytical expressions are derived to explain the role of buffer capacitance in designing and enhancing threshold voltage. Simulations…

We examined the effect of backside insulation on the dynamic on-resistance of lateral p-GaN HEMTs. To gain a comprehensive understanding of the dynamic onresistance difference between substrate grounded and substrate floating p-GaN HEMTs,…

Because high electron mobility transistors (HEMTs) often exhibit significant gate leakage during high-temperature operation, the choice of Schottky metal is critical. Increased gate leakage and reduced ON/OFF ratio are unsuitable for the…

Characteristic electrical curves of GaN HEMT devices from Infineon and Transphorm are compared at different X-ray radiation dose. It is shown that the device with pGaN gate is more robust having a stable threshold voltage (Vth). The Vth of…

In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the…

In this work, we studied the gate breakdown mechanisms of p-GaN gate AlGaN/GaN HEMTs by a novel multiple-gate-sweep-based method. For the first time, three different breakdown mechanisms were observed and identified separately in the same…

We report on the design and demonstration of ultra-wide bandgap (UWBG) AlGaN-channel metal-insulator heterostructure field effect transistors (HEFTs) for high-power, high-frequency applications. We find that the integration of gate…

High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…

A dual-channel AlN/GaN high electron mobility transistor (HEMT) architecture is demonstrated that leverages ultra-thin epitaxial layers to suppress surface-state related gate lag. Two high-density two-dimensional electron gas (2DEG)…

An analysis of recent experimental data for high-performance In0.7Ga0.3As high electron mobility transistors (HEMTs) is presented. Using a fully quantum mechanical, ballistic model, we simulate In0.7Ga0.3As HEMTs with gate lengths of LG =…