Related papers: Linearized and Compensated Interferometric System …
This paper presents the design and validation of a digital receiver system developed for the next-generation radio interferometer projects. The receiver supports 8 analog inputs with 12-bit, 4GHz sampling and performs real-time signal…
We propose a multimodal fusion network (MFN) for precise micro-displacement measurement using a modified Michelson interferometer. The model resolves the intrinsic half-wave displacement ambiguity that limits conventional single-wavelength…
A far-infrared system measures the full complex Faraday angle, rotation as well as ellipticity, with an unprecedented accuracy of 10\,$\mu$rad/T. The system operates on several far-infrared laser lines in the spectral range from 0.3 to 6…
In this article, we present a deflection measurement setup for Atomic Force Microscopy (AFM). It is based on a quadrature phase differential interferometer: we measure the optical path difference between a laser beam reflecting above the…
We introduce a high performance differential dilatometer based on an all-fiber Michelson interferometer at cryogenic temperature with $10^{-10}$ resolution in $\delta L/L$. It resolve the linear thermal expansion coefficient by measuring…
Here we propose, describe, and provide experimental proof-of-concept demonstrations of a multi-dimensional, non-contact length metrology system design based on high resolution (millimeter to sub-100 micron) frequency modulated continuous…
The precise analysis and accurate measurement of harmonic provides a reliable scientific industrial application. However, the high-performance DSP processor is the important method of electrical harmonic analysis. Hence, in this research…
We use magnetic levitation and a variable-separation dual optical plug to obtain clear spatial interference between two condensates axially separated by up to 0.25 mm -- the largest separation observed with this kind of interferometer.…
We report a laser noise reduction method by locking it to an actively stabilized fiber-based Mach Zehnder interferometer with 10 km optical fiber to achieve large arm imbalance. An acousto optic modulator is used for interferometer…
In scanning probe microscopy laser interferometers are usually used for measuring the position of the probe tip with a metrological traceability. As the most of the AFM setups are designed to work under standard atmospheric conditions the…
We demonstrate the imaging capability of a frequency modulated continuous wave lidar based on a fiber bundle. The lidar constructs velocity and range images for hard targets at a rate of 60 Hz. The sensing range is up to 30 m with 20 mW of…
With the continuous advancement of laser technology, accurately evaluating the noise spectrum of high-performance lasers has become increasingly challenging. In this work, we demonstrate a high-precision laser spectrum analyzer based on the…
We demonstrate a novel imaging approach and associated reconstruction algorithm for far-field coherent diffractive imaging, based on the measurement of a pair of laterally sheared diffraction patterns. The differential phase profile…
We report on developing, characterizing, and verifying a compact, monolithic laser interferometric assembly designed for high-precision two- and three-axis displacement measurements in coordinate positioning systems. The design targets OEM…
Measurement of low power infrared light emission spectra from microstructures can be challenging, but is of key importance in several research fields. Fourier transform infrared spectrometers (FTIR) can be used for characterizing such weak…
Fiber-delay measurement is one of the key fundamental technologies in numerous fields. Here we propose and experimentally demonstrate a high-precision and concise optical time delay measurement system based on the technique of linear…
We developed an electron beam size monitor for extremely small beam sizes. It uses a laser interference fringe for a scattering target with the electron beam. Our target performance is < 2 nm systematic error for 37 nm beam size and < 10%…
The proposed Next Linear Collider contains a large number of linac RF systems with new requirements for wideband klystron modulation and accurate RF vector detection. The system will be capable of automatically phasing each klystron and…
The techniques of power recycling and signal recycling have proven as key concepts to increase the sensitivity of large-scale gravitational wave detectors by independent resonant enhancement of light power and signal sidebands within the…
Deep phase modulation interferometry was proposed as a method to enhance homodyne interferometers to work over many fringes. In this scheme, a sinusoidal phase modulation is applied in one arm while the demodulation takes place as a…