Related papers: Creep rate based time to failure prediction of adh…
Motivated by tunnel accidents in the recent past several investigations into the sustained load behavior of adhesive anchors have been initiated. Nevertheless, the reliable life-time prediction of bonded anchor systems based on a relatively…
A subcritical load on a disordered material can induce creep damage. The creep rate in this case exhibits three temporal regimes viz. an initial decelerating regime followed by a steady-state regime and a stage of accelerating creep that…
We present creep experiments on fiber composite materials with controlled heterogeneity. Recorded strain rates and acoustic emission rates exhibit a power law relaxation in the primary creep regime (Andrade law) followed by a power law…
Creep is a time-dependent deformation of solids at relatively low stresses, leading to the breakdown with time. Here we propose a simple model for creep failure of disordered solids, in which temperature and stress are controllable. Despite…
The reporting and evaluation of creep tests of concrete is complicated by the fact that creep is significant even for the shortest observable load durations. Compared to the strain after 0.1 s load duration, the strain at 2 hour duration is…
Yield stress materials fail when the imposed stress crosses a critical threshold. A well-known dynamical response to the applied stress is the phenomenon of creep where the cumulative deformation grows sublinearly with time, prior to…
Stressed under a constant load, materials creep with a final acceleration of deformation and for any given applied stress and material, the creep failure time can strongly vary. We investigate creep on sheets of paper and confront the…
Motivated by recent experiments studying the creep and breakup of a protein gel under stress, we introduce a simple mesoscopic model for the irreversible failure of gels and fibrous materials, and demonstrate it to capture much of the…
We present creep experiments on fiber composite materials. Recorded strain rates and acoustic emission (AE) rates exhibit both a power law relaxation in the primary creep regime and a power-law acceleration before global failure. In…
Creep tests on heterogeneous materials under subcritical loading typically show a power-law decaying strain rate before failure, with the exponent often considered material-dependent but independent of applied stress. By imposing successive…
The static and time-dependent behaviours of adhesively bonded polyethylene Double-Strap (DS) joints were investigated to assess the viability of this joint configuration relative to the Single-Lap (SL) joints. Both experiments and finite…
I adapted a model recently introduced in the context of seismic phenomena, to study creep rupture of materials. It consists of linear elastic fibers that interact in an equal load sharing scheme, complemented with a local viscoelastic…
From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials…
Applying constant tensile stress to a piece of amorphous solid results in a slow extension, followed by an eventual rapid mechanical collapse. This "creep" process is of paramount engineering concern, and as such was the subject of study in…
We present a mesoscale elastoplastic model of creep in disordered materials which considers temperature-dependent stochastic activation of localized deformation events which are mutually coupled by internal stresses, leading to collective…
Additive manufacture and rapid prototyping are versatile methods for the generation of lattice materials for applications in the creep regime. However, these techniques introduce defects that can degrade the macro-scopic creep strength. In…
The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive…
Long-term creep (i.e., deformation under sustained load) is a significant material response that needs to be accounted for in concrete structural design. However, the nature and origin of creep remains poorly understood, and controversial.…
The research reveals the existence of a constant characteristic time of preparatory micro-structural processes before the onset of macro-failure at various high loading rates of brittle and quasi-brittle materials. The presence of this…
The stress analysis of pressurized circumferential pipe weldments under steady state creep is considered. The creep response of the material is governed by Norton's law. Numerical and analytical solutions are obtained by means of…