Related papers: Novel heterojunction bipolar transistor architectu…
We propose a new triple-junction solar cell structure composed of a III-V heterojunction bipolar transistor solar cell (HBTSC) stacked on top of, and series-connected to, a Si solar cell (III-V-HBTSC-on-Si). The HBTSC is a novel…
Independent current extraction in multi-junction solar cells has gained attention in recent years because it can deliver higher annual energy yield and can work for more semiconductor material combinations than the more established…
Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enable contacting the intermediate layer (base) from the…
Multi-terminal multi-junction solar cells (MJSC) offer higher efficiency potential than series connected (two-terminal) ones. In addition, for terrestrial applications, the efficiency of multi-terminal solar cells is less sensitive to solar…
In order to obtain higher conversion efficiency and to reduce production cost for amorphous silicon/crystalline silicon (a-Si/c-Si) based heterojunction solar cells, a Heterojunction of Amorphous silicon and Crystalline silicon with…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
The p-type amorphous/ n-type crystalline silicon (P+ a-Si/N+ c-Si) heterojunction was simulated for developing the solar cells with high conversion efficiency and low cost. The characteristic of such cells with different work function of…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
Single junction Si solar cells dominate photovoltaics but are close to their efficiency limits. This paper presents ideal limiting efficiencies for tandem and triple junction multijunction solar cells subject only to the constraint of the…
The advanced multijunction solar cell (MJSC) has emerged as a frontrunner in photovoltaic literature due to its superior photoconversion efficiency (PCE) owing to its complex fabrication procedure and high costs. This article aims to…
As single junction thin-film technologies, both Si heterojunction (HIT) and Perovskite based solar cells promise high efficiencies at low cost. One expects that a tandem cell design with these cells connected in series will improve the…
Despite the promising optoelectronic properties of methylammonium lead iodide (MAPbI3)-based perovskite solar cells (PSCs), their commercial viability is hindered by interfacial energy misalignment, suboptimal light absorption, and thermal…
Polymer solar cells are considered as very promising candidates for development of photovoltaics of the future. They are cheap and easy to fabricate, however, up to now, they possess fundamental drawback, low effectiveness. In the most…
In this paper we carried out theoretical study of the general issues related to the efficiency of SiC:H/a-Si:H single- and multi-junction tandem solar cells. Implementation of numerical simulations by the use of AMPS-1D program of…
Virtual substrates based on thin Ge layers on Si by direct deposition have achieved high quality recently. Their application to high efficiency III-V solar cells is analyzed in this work. Replacing traditional Ge substrates with Ge/Si…
We obtain theoretical expressions for the photocurrent in the Heterojunction solar cells with Intrinsic Thin layer (HIT cells). Our calculations take into account tunneling of electrons and holes through wide-bandgap layers of $\alpha$-Si:H…
There are recent investigations regarding tandem solar cells with a top perovskite cell and a bottom silicon one with a potential of > 25% power conversion efficiency. Because of still high production costs of silicon cells it is believed…
This study investigates a four-terminal mechanically stacked double junction photovoltaic device based on GaAs as a top subcell and Si as a bottom subcell. Unlike two terminal monolithically series connected double junction photovoltaics,…
Heterostructures based on atomically thin semiconductors are considered a promising emerging technology for the realization of ultrathin and ultralight photovoltaic solar cells on flexible substrates. Much progress has been made in recent…
Perovskite (CH3NH3PbI3) solar cells have made significant advances recently. In this paper, we propose a bilayer heterojunction solar cell comprised of a perovskite layer combining with a IV-VI group semiconductor layer, which can give a…