Related papers: Stoichiometry, Phase, and Texture Evolution in PLD…

The electronic anisotropy in MgB2, is still a not completely clear topic; high quality c-oriented films are suitable systems to investigate this property. In this work we present our results on MgB2 superconducting thin films grown on MgO…

In this paper, we present an experimental study of $\text{L1}_0$-FePt granular films with crystalline/amorphous boron nitride (BN) grain boundary materials for heat assisted magnetic recording (HAMR). It is found that an adequate RF…

We report the growth of potassium-doped BaFe2As2 thin films, where the major charge carriers are holes, on Al2O3 (0001) and LaAlO3 (001) substrates by using an ex-situ pulsed laser deposition technique. The measured Tc's are 40 and 39 K for…

Ga2O3 thin films were deposited by reactive magnetron sputtering from a liquid gallium target. The influence of deposition temperature, substrate type, and discharge parameters on the structural and electrical properties was systematically…

RF plasma assisted MBE growth of Scandium Nitride (ScN) thin films on GaN (0001)/SiC, AlN (0001)/Al2O3 and on 6H-SiC (0001) hexagonal substrates is found to lead to a face centered cubic (rock-salt) crystal structure with (111) out-of-plane…

Sm0.53Sr0.47MnO3 thin films were deposited on single crystal LaAlO3 (LAO/(001)) and SrTiO3 (STO/(001)) substrates by DC magnetron sputtering. The theta-2theta and omega-2theta scans show that these films have very good crystallinity and the…

Biaxially textured LuNi2BC thin films with Tc up to 15.8 K and a residual resistivity ratio up to 15 have been prepared. The films were deposited on MgO(110) substrates using pulsed laser deposition from a stoichiometric target. Via the…

Electronic and magnetic structure of $(100)$ films of K and Cs are calculated within the plane-wave projector augmented wave (PAW) formalism of the density functional theory (DFT) using both local spin density approximation (LSDA) and the…

Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to…

Thin films of HfO2 doped with 4% La were fabricated on LSMO/STO (100) substrates using pulsed laser deposition. The stability of the ferroelectric orthorhombic phase in the hafnia films was investigated with respect to varying oxygen…

1.8 micrometer-thick magnesium hydride films were synthesized in a single-step process by reactive plasma-assisted sputtering. The MgH2 thin films, which were deposited on two types of flexible surfaces (namely graphite and polyimide foils)…

FeSe$_{1-x}$Te$_{x}$ thin films with PbO-type structure are successfully grown on MgO(100) and LaSrAlO$_{4}$(001) substrates from FeSe$_{1-x}$Te$_{x+d}$ polycrystalline targets by pulsed-laser deposition. The film deposited on the MgO…

Multiferroic BiFeO3 epitaxial films with thickness ranging from 40 nm to 960 nm were grown by pulsed laser deposition on SrTiO3 (001) substrates with SrRuO3 bottom electrodes. X-ray characterization shows that the structure evolves from…

Aluminum oxide thin films were deposited on silicon substrates under different deposition conditions using pulse pressure metal organic chemical vapour deposition (PP-MOCVD). The current study investigates into the growth mechanism of the…

We report an experimental investigation on the Doppler-free saturated absorption spectroscopy of buffer-gas-cooled Barium monofluoride (BaF) molecules in a 4~K cryogenic cell. The obtained spectra with a resolution of 19~MHz, much smaller…

Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…

Systematic studies of the gradual fabrication by means of carbon ion-implantation of high-quality 6H-SiC layers on silicon surfaces have been carried out. The fluence of carbon ions varied from 5*10^15 cm-2 to 10^17 cm-2. Results of…

The role of stoichiometry and growth temperature in the preferential nucleation of material phases in the Li-Nb-O family are explored yielding an empirical growth phase diagram. It is shown that while single parameter variation often…

In pulsed laser deposition, thin film growth is mediated by a laser-generated plasma, whose properties are critical for controlling the film microstructure. The advent of 2D materials has renewed the interest in how this ablation plasma can…

Cu2Ta4O12 (CTaO) thin films were successfully deposited on Si(100) substrates by pulsed-laser deposition technique. The crystalline structure and the surface morphology of the CTaO thin films were strongly affected by substrate temperature,…