Related papers: Stabilization of binary NiO-YSZ nanocolloids for d…
Water dispersion of nanometric yttria stabilized zirconia (YSZ) particles synthesized by continuous hydrothermal synthesis are transferred into nanoinks for thin film deposition. YSZ nanoparticles are synthesized in supercritical conditions…
Inkjet printing of 8% Y2O3-stabilized ZrO2 (YSZ) thin films is achieved by designing a novel water-based reactive ink for Drop-on-Demand (DoD) inkjet printing. The ink formulation is based on a novel chemical strategy that consists of a…
In nanoparticle haloing, charged nanoparticles have been found to enhance the stability of colloidal suspensions by forming a non-adsorbing layer surrounding neutral colloids which induces an electrostatic repulsion between them. However,…
Applications of nanoparticles in biology require that the nanoparticles remain stable in solutions containing high concentrations of proteins and salts, as well as in cell culture media. In this work, we developed simple protocols for the…
Gd0.2Ce0.8O1.9/Y0.16Zr0.84O1.92 (GDC/YSZ) nanocomposite is synthesized by a novel hybrid chemical route, where colloidal crystalline GDC nanoparticles from continuous hydrothermal synthesis are dispersed into a metalorganic YSZ matrix…
The present study describes a facile route of zinc oxide (ZnO) grows using the solution-dependent electrostatic spray deposition (ESD) method at temperatures ranging from 300 {\deg}C - 500 {\deg}C. In this work, zinc chloride (ZnCl2) was…
Nickel oxide (NiO) is a binary compound with a lot of applications in the present technology. NiO thin films were deposited by reactive sputtering magnetron under several voltage biases applied in the glass substrates (0, 50, 100, 200, 300,…
Currently, additive manufacturing of ceramics by stereolithography (SLA) is limited to single materials and by a poor thickness resolution that strongly depends on the ceramic particles-UV light interaction. Combining selective laser curing…
We present a confocal-microscopy study of demixing and remixing in binary liquids containing colloidal particles. First, particle-stabilized emulsions have been fabricated by nucleation and growth of droplets upon cooling from the…
Developing nanostructured bulk ceramics is a major challenge when conventional high-temperature sintering is employed for consolidation. In the current investigation, yttria-stabilized zirconia (YSZ) with a composition of ZrO2 - 3 mol% Y2O3…
We report on a novel room temperature approach for the synthesis of environmentally-friendly copper zinc tin sulfide ($Cu_2ZnSnS_4$) nanoparticles. The method is shown to be compositionally robust and able to produce $S^{2-}$-stabilized…
NiO/ZnO-based thin films, including single-layer and heterostructure configurations, were synthesized to investigate the influence of stacking order on their electrochemical performance for supercapacitor applications. To improve the…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
Nanocomposite thin films of Zinc Oxide and Silicon were grown by co-evaporating powdered ZnO and Si. This resulted in nanocrystallites of ZnO being embedded in Silicon. The mismatch in crystal structures of constituent materials result in…
The evaporation of liquid droplets often results in a ring-like deposition pattern of particles, presenting challenges for applications requiring highly uniform patterns. Despite extensive efforts to suppress the coffee ring effect,…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
Whereas many studies have examined stabilization of emulsions and foams in low salinity aqueous phases with nanoparticles (NPs) with and without added surfactants, interest has grown recently in much higher salinities relevant to subsurface…
Nanostructured Zinc oxide (ZnO) was synthesized via a ball milling for 10 hours using high energy planetary ball mill. Phase purity and homogeneity of all the samples have been investigated by X-ray diffraction (XRD) and Field Emission…
We present a detailed numerical study of effective interactions between micron-sized silica spheres, induced by highly charged zirconia nanoparticles. It is demonstrated that the effective interactions are consistent with a recently…
GdxCe1-xO2-d (GDC) nanoparticles were synthesized, using continuous hydrothermal flow synthesis. By varying the synthesis conditions, particle size and morphology could be tailored. Here, particle sizes between 6 and 40 nm with polyhedral…