Related papers: First performance test of 30 mm iron-based superco…
Iron with a large magnetic moment was widely believed to be harmful to the emergence of superconductivity because of the competition between the static ordering of electron spins and the dynamic formation of electron pairs (Cooper pairs).…
Thrust measurements were performed on a coil made of YBa2Cu3O7-d coated conductor acting as the excitation system of a single-sided linear synchronous motor. The superconducting coil was a single pancake in the shape of a racetrack with 100…
Iron-pnictides are hotly studied since 2008 in the superconducting materials research area, due to their special properties and unclear mechanism. Big achievement has been made in the pnictide research during the past years. For practical…
The high upper critical field and low anisotropy of iron-based superconductors make them being particularly attractive for high-field applications. However, the current carrying capability needs to be enhanced by overcoming the weak-link…
A trapped field of over 1 T at 5 K and 0.5 T at 20 K has been measured between a stack of magnetized cylinders of bulk polycrystalline Ba0.6K0.4Fe2As2 superconductors 10 mm in diameter and 18 mm in combined thickness. The trapped field…
A racetrack coil using MgB2/Cu strand has been fabricated and tested for transport current density at 4.2 K in self field. The monofilamentary strand was 1.0 mm OD and insulated with S-glass braid. Eighty turns of strand (42 m) were wound…
The recently discovered iron-based superconductors with very high upper critical field and small anisotropy have been regarded as a potential candidate material for high field applications. However, enhancements of superconducting…
We present the fabrication and test results of Hot-Isostatic-Pressed (HIPed) Powder-in-Tube (PIT) MgB$_2$ coils. The coils properties were measured by transport and magnetization at different applied fields ($H$) and temperatures ($T$). The…
To explore the limits of layer wound (RE)Ba2Cu3O7-x (REBCO, RE = Rare Earth) coils in a high magnetic field environment > 30 T, a series of small insert coils have been built and characterized in background fields. One of the coils…
Superconducting joints are one of the key technologies to make Ba1-xKxFe2As2 (Ba-122) superconducting wires or tapes for high-field applications. Herein, superconducting joints were fabricated by a simple cold-pressing method, and the joint…
Since the discovery of high Tc iron-based superconductors in early 2008, more than 15,000 papers have been published as a result of intensive research. This paper describes the current status of iron-based superconductors (IBSC) covering…
The most effective way to enhance the dissipation-free supercurrent in presence of magnetic field for type II superconductors is the introduction of defects that acts as artificial pinning centres (APCs) for the vortices. For instance, the…
We report here that magnetic fields of almost 34 T, far above the upper 24 T limit of Nb3Sn, can be generated using a multifilament round wire conductor made of the high temperature cuprate superconductor Bi2Sr2CaCu2O8-x (Bi-2212). A…
Point contact spectroscopy (PCS) is a technique which can reveal the size and symmetry of a superconducting gap ($\Delta$) and is especially useful for new materials such as the iron-based superconductors. PCS is usually employed in…
We present a magnetic field confining coil with a sub-$10^{-3}$ field uniformity over a large fraction of the coil. The structure is entirely made out of printed circuit boards (PCBs). The PCB design allows to tailor the path of wires to…
We report the fabrication of small (Ba,A)Fe2As2 (A: Na, K) coils using 10 m-class long round wires, fabricated by powder-in-tube (PIT) method. Coils are sintered using hot-isostatic-press (HIP) technique after glass-fiber insulations are…
The first pre-prototype of a single-coil superconducting miniundulator has been built and studied. Its basic specifications include 10 main periods and two end compensation periods, a period length of 7 mm, and a gap of 2 mm. The design is…
The influence of mechanical strain on the critical current (Ic) is investigated for MgB2/stainless steel (SUS316) superconducting tapes. The tapes are fabricated by using 'powder in tube' method and deformation process without any heat…
Here a minimum power dissipation coil transducer has been designed to allow in-flight noise characterization of a low-frequency magnetic measurement system. The coil was produced using PCB technology to provide mechanical stability and easy…
Transport critical current (Ic) was measured for MgB2/Fe round wires, with magnetic field oriented perpendicular to the wire and parallel to it. Measurements were made on a wire with pure MgB2 core and another wire where MgB2 core was doped…