Related papers: Ti surface modification for biomedical application…
Flat TiO$_2$ layers are deposited by magnetron sputtering on Ti/Si wafers. The TiO$_2$ surfaces are then sputter-coated with thin Au films of a nominal thickness of 0.5-10 nm that are converted by solid-state dewetting into Au nanoparticles…
Using an organometallic precursor, TiO$_2$ coatings were fabricated on surfaces of quartz, zircon and rutile sands. X ray Diffraction, X ray Fluorescence, UV Vis spectroscopy and surface area measurement were used to characterise support…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
The chemical composition and structural state of advanced alloys are the decisive factors in optimum biomedical performance. This contribution presents unique Ti-Zr-Ge metallic glass thin-film compositions fabricated by magnetron sputter…
LaMnO$_3$ (LMO) thin films epitaxially grown on SrTiO$_3$ (STO) usually exhibit ferromagnetism above a critical layer thickness. We report the use of scanning SQUID microscopy (SSM) to study the suppression of the ferromagnetism in…
In this work we present an X-ray Absorption Spectroscopy characterization of the local environment of the impurity in room temperature ferromagnetic anatase TiO2 thin films doped with Co, Ni, Cu, or Zn, deposited on LaAlO3 substrate by…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
Ceramic samples, produced by conventional sintering method in ambient air, 6H-SrMnO$_3$(6H-SMO), 15R-BaMnO$_3$(15R-BMO), 4H-Ba$_{0.5}$Sr$_{0.5}$MnO$_3$(4H-BSMO) were studied. In the XRD measurements for SMO the new anomalies of the lattice…
Effects of X-ray irradiation on the electronic structure of LaAlO$_3$/SrTiO$_3$ (LAO/STO) samples, grown at low oxygen pressure and post-annealed ex-situ till recovery of their stoichiometry, were investigated by soft-X-ray ARPES. The…
Using cross-sectional scanning tunneling microscopy on in situ fractured SrTiO$_{3}$, one of the most commonly used substrates for the growth of complex oxide thin films and superlattices, atomically smooth terraces have been observed on…
We have developed a multi-objective optimization (MOO) procedure to construct modified-embedded-atom-method (MEAM) potentials with minimal manual fitting. This procedure has been applied successfully to develop a new MEAM potential for…
We investigated the effects of paramagnetic (PM) fluctuations on the thermochemistry of the MnO(100) surface in the oxygen evolution reaction (OER) using the "noncollinear magnetic sampling method \textit{plus} $U$" (NCMSM$+U$). Various…
First-principles calculations are used to gauge different levels of approximation to calculate the magnetocrystalline anisotropy energies (MAE) of five $L1_0$ FeMe alloys (Me=Co, Cu, Pd, Pt, Au). We find that a second-order perturbation…
Vanadium (IV) oxide is one of the most promising materials for thermochromic films due to its unique, reversible crystal phase transition from monoclinic (M1) to rutile (R) at its critical temperature (T$_c$) which corresponds to a change…
Bi2Sr2Ca1Cu2O8+d (Bi-2212) thin films with thicknesses less than 50 nm (<20 unit cells) are grown by pulsed laser deposition (PLD) onto (001) LaAlO3 (LAO) single crystal substrates. Phase-pure and smooth c-axis oriented Bi-2212 films with…
Bio-inspired materials are commonly used in the development of functional devices. The fabrication of artificial cilia mimicking the biological functions has emerged as a promising strategy for fluid manipulation in miniaturized systems. In…
The electrical properties of thin TiO2 films have recently been extensively exploited towards enabling a variety for metal-oxide electron devices: unipolar/bipolar semiconductor devices and/or memristors. In such efforts, investigations on…
Many alloys made by Additive Manufacturing (AM) require careful design of post-heat treatment as an indispensable step of microstructure engineering to further enhance the performance. We developed a high-throughput approach by fabricating…
In this paper, the effect of Ar+ bombardment of SrTiO3:Nb surface layers is investigated on the macro- and nanoscale using surface-sensitive methods. After bombardment, the stoichiometry and electronic structure are changed distinctly…
Designing systems with large magnetic anisotropy energy (MAE) is desirable and critical for nanoscale magnetic devices. A recent breakthrough achieved the theoretical limit of the MAE for 3$d$ transition metal atoms by placing a single Co…