Related papers: A New Signal Injection-based Method for Estimation…
Sensorless control of Permanent-Magnet Synchronous Motors (PMSM) at low velocity remains a challenging task. A now well-established method consists in injecting a high-frequency signal and use the rotor saliency, both geometric and…
Sensorless control of Permanent-Magnet Synchronous Motors at low velocity remains a challenging task. A now well-established method consists in injecting a high-frequency signal and use the rotor saliency, both geometric and…
We demonstrate how the rotor position of a PWM-controlled PMSM can be recovered from the measured currents, by suitably using the excitation provided by the PWM itself. This provides the benefits of signal injection, in particular the…
Permanent magnet synchronous motors (PMSM) are widely used due to their numerous benefits. It is critical to get rotor position and speed information in order to operate the motor accurately. Sensorless control techniques have emerged as a…
The characterization of an interior permanent magnet synchronous machine (IPMSM) requires numerical analysis of the nonlinear magnetic motor model in different load conditions. To obtain the case-specific best machine behavior, a strategy…
This paper proposes machine-independent feature engineering for winding inter-turn short circuit fault that uses electrical current signals. Electrical current signal collected from permanent magnet synchronous motor (PMSM) is subjected to…
We propose a parametric model of the saturated Permanent-Magnet Synchronous Motor (PMSM) together with an estimation method of the magnetic parameters. The model is based on an energy function which simply encompasses the saturation…
Permanent Magnet Synchronous Motors (PMSMs) are widely employed in high-performance drive systems owing to their high efficiency and power density. However, nonlinear dynamics, parameter uncertainties, and load disturbances complicate their…
The design of a position observer for the interior permanent magnet synchronous motor is a challenging problem that, in spite of many research efforts, remained open for a long time. In this paper we present the first globally exponentially…
This paper proposes a nonlinear magnetics model for Permanent Magnet Synchronous Machines (PMSMs) that accurately captures the effects of magnetic saturation in the machine iron and variations in rotor temperature on the permanent magnet…
A predictive control scheme for a permanent-magnet synchronous machine (PMSM) is presented. It is based on a suboptimal method for computationally efficient trajectory generation based on continuous parameterization and linear programming.…
In this work, we present a mixed sensorless strategy for Permanent Magnets Synchronous Machines, combining a torque/current controller and an observer for position, speed, flux and stator resistance. The proposed co-design is motivated by…
A model predictive control (MPC) scheme for a permanent-magnet synchronous motor (PMSM) is presented. The torque controller optimizes a quadratic cost consisting of control error and machine losses repeatedly, accounting the voltage and…
Monitoring the magnet temperature in permanent magnet synchronous motors (PMSMs) for automotive applications is a challenging task for several decades now, as signal injection or sensor-based methods still prove unfeasible in a commercial…
Magneto-mechanical resonators (MMRs) represent a recently proposed type of passive sensor that enables the estimation of its pose as well as sensing other parameters in its environment. The working principle of MMRs entails an excitation of…
In the paper by Vaclavek et al. (IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3047-3059, Aug. 2013), the local observability of both induction machine and permanent-magnet synchronous machine (PMSM) under motion-sensorless operation is…
Integration of intermittent renewable energy sources in modern power systems is increasing very fast. Replacement of synchronous generators with zero-to-low variable renewables substantially decreases the system inertia. In a large system,…
The performance of model predictive controllers (MPC) strongly depends on the model quality. In the field of electric drive control, white-box (WB) modeling approaches derived from first-order physical principles are most common. This…
Non-ideal position estimation results in degraded performance of synchronous motor drive systems due to reduction of the average capability of the drive as well as torque harmonics of different orders. The signature and extent of the…
In this paper, an improved multi-step finite control set model predictive current control (FCS-MPCC) strategy with speed loop disturbance compensation is proposed for permanent magnet synchronous machine (PMSM) drives system. A multi-step…