Related papers: Interdiffusion in Group IV Semiconductor Material …
Silicon carbide (SiC) has become a popular material for next-generation power components due to its smaller size, faster switching speed, simpler cooling and greater reliability than Si-MOSFETs. With this in mind, we are thinking about…
Unintentionally formed interfacial layers are ubiquitous in semiconductor devices that operate at extreme conditions. However, these layers' structure and properties often remain unknown due to the thinness of these naturally formed…
The photo-luminescence features of Ge-oxygen defect centers in a 100nm thick Ge-doped silica film on a pure silica substrate were investigated by looking at the emission spectra and time decay detected under synchrotron radiation excitation…
InSe is a van der Waals semiconductor in which mechanical flexibility, high electronic mobility, and non-trivial electronic structures converge, making it an attractive platform for both intriguing fundamental studies and promising device…
Issues of Ge hut array formation and growth at low temperatures on the Ge/Si(001) wetting layer are discussed on the basis of explorations performed by high resolution STM and in-situ RHEED. Data of HRTEM studies of multilayer Ge/Si…
Existence of van der Waals gaps renders two-dimensional (2D) materials ideal passages of lithium for being used as anode materials. However, the requirement of good conductivity significantly limits the choice of 2D candidates. So far only…
Estimating the diffusion coefficients experimentally in a four-component inhomogeneous alloy following the conventional diffusion couple method by intersecting three couples at the same composition is difficult unless a small composition…
Graphene / silicon (G/Si) heterostructures have been studied extensively in the past years for applications such as photodiodes, photodetectors and solar cells, with a growing focus on efficiency and performance. Here, a specific contact…
A simple model to describe Mixed Ionic Electronic Conductors (MIEC) in terms of standard semiconductor physics is described. This model allows to understand defect equilibrium and charge transport at ideal heterojunctions between materials…
Several hitherto unexplained features of thermal conductivity in group IV materials, such as the change in the slope as a function of sample size for pure vs. alloyed samples and the fast decay in thermal conductivity for low impurity…
Silicon-based terahertz quantum cascade lasers (QCLs) offer potential advantages over existing III-V devices. Although coherent electron transport effects are known to be important in QCLs, they have never been considered in Si-based device…
Solution processable two-dimensional (2D) materials have provided an ideal platform for both fundamental studies and wearable electronic applications. Apart from graphene and 2D dichalcogenides, IVA-VI monochalcogenides (MMCs) has emerged…
Heterogeneous superconductivity onset is a common phenomenon in high-$T_c$ superconductors of both the cuprate and iron-based families. It is manifested by a fairly wide transition from the metallic to zero-resistance state. Usually, in…
Single crystal neutron diffraction study has been performed on new superconductor A2Fe4Se5, where A = Cs, K, (Tl,Rb) and (Tl,K), and the same Fe vacancy ordered crystal structure and the same block checkerboard antiferromagne tic order…
Energy carrier transport and recombination in emerging semiconductors can be directly monitored with optical microscopy, leading to the measurement of the diffusion coefficient (D), a critical property for design of efficient optoelectronic…
The approximate location in the Zaanen-Sawatzky-Allen diagram of the phase-separated (Ga,Mn)As material, consisting of MnAs nanoclusters embedded in GaAs, is determined on the basis of configuration-interaction (CI) cluster-model analysis…
The n-type doping of Ge is a self-limiting process due to the formation of vacancy-donor complexes (DnV with n <= 4) that deactivate the donors. This work unambiguously demonstrates that the dissolution of the dominating P4V clusters in…
The control over impurities like hydrogen and oxygen is of key importance in nitride-based semiconducting due to their unrivaled applicability in optoelectronics and high power/high frequency electronics. Therefore, it is desirable to…
Engineering light absorption in the extended short-wave infrared (e-SWIR) range using scalable materials is a long-sought-after capability that is crucial to implement cost-effective and high-performance sensing and imaging technologies.…
The macroscopic dielectric function in the random-phase-approximation without local field effect has been implemented using the local density approximation with an all electron, full-potential linear muffin-tin orbital basis-set. This…