Related papers: X-ray diffraction analysis to support phase identi…

Pulsed laser deposition (PLD) is a versatile technique for growing epitaxial heterostructures of a wide variety of novel materials combinations. Achieving low-defect layers with atomically sharp interfaces by PLD requires careful management…

Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…

Epitaxial films which contains more than one crystallographic orientation are of interest due to the possibility of altered magnetic, electrical, and optical properties. Thin films of FeSe have been grown on single-crystal MgO substrates…

We present a pulsed laser deposition (PLD) system that can monitor growth by simultaneously using in situ optical spectroscopic ellipsometry (SE) and reflection high-energy electron diffraction (RHEED). The RHEED precisely monitors the…

Thin film growth of iron chalcogenides by pulsed laser deposition (PLD) is still a delicate issue in terms of simultaneous control of stoichiometry, texture, substrate/film interface properties, and superconducting properties. The high…

Thin films of Fe(1+delta)Se(1-x)Te(x) (delta ~ 0.18 & x ~ 0.5) have been successfully grown on (100) oriented single crystalline SrTiO3 and LaAlO3 substrates by pulsed laser deposition. The crystal structure was characterized by x-ray…

We have grown lead iron niobate thin films with composition Pb(Fe1/2Nb1/2)O3 (PFN) on (0 0 1) SrTiO3 substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar…

We present results on growth of large area epitaxial ReS2 thin film both on c plane sapphire substrate and MoS2 template by pulsed laser deposition (PLD). Films tend to grow with (0001) ReS2 perpendicular to (0001) Al2O3 and (0001) ReS2…

Pulsed Laser Deposition in molecular-beam epitaxy environment (Laser-MBE) has been used to grow high quality BaCuOx/CaCuO2 superlattices. In situ Reflection High Energy Electron Diffraction (RHEED) shows that the growth mechanism is…

We report the successful growth of epitaxial thin films of FeSe$_{1-x}$S$_x$ with $x \leq 0.43$ via pulsed laser deposition. As S content increases, the nematic transition temperature, $T_{\mathrm s}$, decreases systematically and the…

Mesoporous films of the metal chalcogenide $\beta$-FeSe were grown on MgO substrates by KrF pulsed laser deposition (PLD) in an argon background. At 100 mTorr, gated intensified charge-coupled device imaging and ion probe measurements…

FeSex (x = 0.80, 0.84, 0.88, 0.92) thin films were prepared on SrTiO3(001) (STO), (La,Sr)(Al,Ta)O3(001) (LSAT), and LaAlO3(001) (LAO) substrates by pulsed laser deposition method. All thin films show single-phase and c-axis oriented…

We report on epitaxial growth of single-phase [Pb(Zr0.57Ti0.43)O3]0.8[Pb(Fe2/3W1/3)O3]0.2 (PZT-PFW) solid-solution thin films using pulsed laser deposition. X-ray diffraction measurements reveal that the films have a tetragonal structure.…

Epitaxial Fe film has been grown on ion beam sputtered MgO(001) substrate by electron beam evaporation. Reflection high energy electron diffraction (RHEED) and transport measurements (TM) were performed simultaneously during the growth of…

Superconductivity was recently found in the simple tetragonal FeSe structure. Recent studies suggest that FeSe is unconventional, with the symmetry of the superconducting pairing state still under debate. To tackle these problems, clean…

Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted…

Epitaxial (001)-, (118)-, and (104)-oriented Nd-doped Bi4Ti3O12 films have been grown by pulsed-laser deposition from a Bi4-xNdxTi3O12 (x=0.85) target on SrRuO3 coated single-crystal (100)-, (110)-, and (111)-oriented SrTiO3 substrates,…

We report the growth of undoped and Fe (2 and 5 at. percentage) doped molybdenum oxide thin films on c-plane of sapphire substrate using pulsed laser ablation. X-ray diffraction results show that the films are oriented in (100) direction…

In situ reflective high-energy electron diffraction (RHEED) is widely used to monitor the surface crystalline state during thin-film growth by molecular beam epitaxy (MBE) and pulsed laser deposition. With the recent development of machine…

We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples…