Related papers: A kilo-Ampere level HTS flux pump
Due to the properties of high temperature superconducting (HTS) materials, current attenuation is inevitable during the closed-loop operation of HTS magnets. When a contact DC power supply is used to supplement this attenuation, it…
High temperature superconducting (HTS) dynamos are promising devices that can inject large DC currents into the winding of superconducting machines or magnets in a contactless way. Thanks to this, troublesome brushes in HTS machines or…
2G high temperature superconducting (HTS) wires, YBCO coated conductors, perform a better carrying current capability, which is potentially applied in the manufacture of HTS magnets. This paper presents the experimental results of the…
The high-$T_c$ superconducting (HTS) dynamo exploits the nonlinear resistivity of an HTS tape to generate a DC voltage when subjected to a varying magnetic field. This leads to the so-called flux pumping phenomenon and enables the injection…
Design, fabrication and assembly of a novel fast-cycling accelerator magnet is presented. A short-sample magnet is powered with a single-turn HTS cable capable to carry 80 kA current at 20 K and generate 1.75 T field in a 40 mm magnet gap.…
HTS dynamo magnetic flux pumps are perspective devices for contactless charging the superconductor magnets and coils. In this work, we investigate the influence of a ferromagnetic substrate of a coated conductor used as the pump stator. We…
HTS has the potential of a game changer for many applications of superconductivity, not last in the field of particle accelerators and detectors. This paper explores the potential of HTS, with a focus on REBCO-coated conductors, in relation…
We reveal obstacles related to the application of HTS cylinders in current limiting devices based on the superconducting - normal state transition. It is shown that, at the critical current density achieved presently in bulk materials, and…
A superconducting magnetometers based on the magnetic field dependence of the Eck step voltage in long Josephson tunnel junctions (LJTJs) is demonstrated. The field to be measured is applied perpendicular to a continuous superconducting…
Numerous proposed and developed superconducting fault current limiters and self-limiting transformers limit successfully fault currents but do not provide uninterrupted supplying of consumers. A design investigated in the work combines the…
Large high field superconducting magnets often requires high current superconducting cables. In order to develop these cables, a facility capable of providing high magnetic field with large sampling area as well as electrical current of…
Direct current (DC) characterization of high temperature superconducting (HTS) coils is important for HTS applications, such as electric machines, superconducting magnetic energy storage (SMES) and transformers. In this paper, DC…
Superconducting bulk (RE)Ba$_2$Cu$_3$O$_{7-x}$ materials (RE-rare earth elements) have been successfully used to generate magnetic flux densities in excess of 17 T. This work investigates an alternative approach by trapping flux in stacks…
A facility capable of testing superconducting cables with current of tens of kA is essential for the development of large superconducting magnets. A superconducting transformer (SCT) is a suitable choice as a high DC current source for…
This paper presents experimental and modelling results of an ultra-compact self-rectifier flux pump energizing a superconducting coil. The device fits inside a volume of 65x65x50~mm and generates up to 320~A dc through the coil and a peak…
In this paper, the authors investigate a number of design and market considerations for an axial flux superconducting electric machine design that uses high temperature superconductors. This work was carried out as part of the University of…
We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current…
Understanding and controlling the motion of superconducting vortices has been a key issue in condensed matter physics and applied superconductivity. Here we present a method for macroscopically manipulating the vortices based on travelling…
We report results of the experimental test of the High Temperature Superconductor based fast cycling prototype accelerator magnet capable to operate up to about 300 Tesla per second field ramping rate with some 0.5 T field in the magnet…
The high-Tc superconducting (HTS) dynamo is a promising device that can inject large DC supercurrents into a closed superconducting circuit. This is particularly attractive to energise HTS coils in NMR/MRI magnets and superconducting…