Related papers: MIMO-UFMC Transceiver Schemes for Millimeter Wave …
Phase noise (PN) is a major disturbance in MIMO systems, where the contribution of different oscillators at the transmitter and the receiver side may degrade the overall performance and offset the gains offered by MIMO techniques. This is…
The degrading effect of RF impairments on the performance of wireless communication systems is more pronounced in MIMO-OFDM transmission. Two of the most common impairments that significantly limit the performance of MIMO-OFDM transceivers…
Millimeter wave (mmWave) signals experience orders-of-magnitude more pathloss than the microwave signals currently used in most wireless applications. MmWave systems must therefore leverage large antenna arrays, made possible by the…
Motivated by the demand for energy-efficient communication solutions in the next generation cellular network, a mixed-ADC receiver architecture for massive multiple input multiple output (MIMO) systems is proposed, which differs from…
The millimeter wave (mmW) frequency spectrum has been explored recently for large bandwidth communication. At these frequencies, narrow directional beams are required for communication since the signal attenuation is high due to atmospheric…
The key obstacle to achieving the full potential of the millimeter wave (mmWave) band has been the poor propagation characteristics of wireless signals in this band. One approach to overcome this issue is to use antennas that can support…
Future wireless communication systems are envisioned to support ultra-reliable and low-latency communication (URLLC), which will enable new applications such as compute offloading, wireless real-time control, and reliable monitoring.…
Millimeter wave signals with multiple transmit and receive antennas are considered as enabling technology for enhanced mobile broadband services in 5G systems. While this combination is mainly associated with achieving high data rates, it…
In this thesis, we investigate the problem of efficient data detection in large MIMO and high order MU-MIMO systems. First, near-optimal low-complexity detection algorithms are proposed for regular MIMO systems. Then, a family of…
In this work, we discuss techniques for coherently detecting turbo coded orthogonal frequency division multiplexed (OFDM) signals, transmitted through frequency selective Rayleigh (the magnitude of each channel tap is Rayleigh distributed)…
Machine learning (ML) can be used in various ways to improve multi-user multiple-input multiple-output (MU-MIMO) receive processing. Typical approaches either augment a single processing step, such as symbol detection, or replace multiple…
Affine frequency division multiplexing (AFDM) is a promising waveform for future wireless communication systems. In this paper, we analyze the impact of receiver in-phase and quadrature (IQ) imbalance and residual carrier frequency offset…
The impact of both multiplicative and additive hardware impairments (HWIs) on multiple-input multiple-output affine frequency division multiplexing (MIMO-AFDM) systems is investigated. For small-scale MIMO-AFDM systems, a tight bit error…
The large spectrum available in the millimeter-Wave (mmWave) band has emerged as a promising solution for meeting the huge capacity requirements of the 5th generation (5G) wireless networks. However, to fully harness the potential of mmWave…
Massive multiple-input multiple-output (MIMO) systems have been drawing considerable interest due to the growing throughput demands on wireless networks. In the uplink, massive MIMO systems are commonly studied assuming that each base…
The integrated sensing and communication (ISAC) system under multi-input multi-output (MIMO) architecture achieves dual functionalities of sensing and communication on the same platform by utilizing spatial gain, which provides a feasible…
Since the introduction of massive MIMO (mMIMO), the design of a transceiver with feasible complexity has been a challenging problem. Initially, it was believed that the main issue in this respect is the overall RF-cost. However, as mMIMO is…
Millimeter wave (mmWave) massive MIMO can achieve orders of magnitude increase in spectral and energy efficiency, and it usually exploits the hybrid analog and digital precoding to overcome the serious signal attenuation induced by mmWave…
Low-resolution analog-to-digital converters (ADCs) and hybrid beamforming have emerged as efficient solutions to reduce power consumption with satisfactory spectral efficiency (SE) in massive multiple-input multiple-output (MIMO) systems.…
In this letter, we investigate an important and famous issue, namely weighted mean-square-error (MSE) minimization transceiver designs. In our work, for transceiver designs a novel weighted MSE model is proposed, which is defined as a…