Related papers: Nano-Mechanical Behaviour Of MnTiO3 Ceramics
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
The mechanical properties of minerals in planetary materials are not only interesting from a fundamental point of view but also critical to the development of future space missions. Here we present nanoindentation experiments to evaluate…
Germanium magnesium-telluroborate glasses with the composition 78B2O3-10GeO2-5TeO2-7-x MgO-xTm2O3, x = 0, 0.25, 0.5, 1, and 1.5 mol% were fabricated by using the melt quenching process. With the increase of Tm2O3 concentration, the density…
$La_{0.7}Ca_{0.3}MnO_3$ samples were prepared in nano- and polycrystalline forms by sol-gel and solid state reaction methods, respectively, and structurally characterized by synchrotron X-ray diffraction. The magnetic properties determined…
The carbon atom distribution in a tempered martensitic steel processed by cold drawing was investigated with a three-dimensional atom probe. Data clearly show that cementite starts to decompose at the early stage of deformation. This…
Surface Acoustic Waves on piezoelectric substrates can be used to investigate the dynamic conductivity of thin films in a non-contact and very sensitive way, especially at low conductivities. Here, we report on such surface acoustic wave…
Complex oxide thin films and heterostructures exhibit a profusion of exotic phenomena, often resulting from the intricate interplay between film and substrate. Recently it has become possible to isolate epitaxially grown single-crystalline…
We have performed hardness measurement experiments under different loads and loading times by performing micro-indentation marks in the present work. Chalcogenide glasses (ChGs) comprising Se$_{78}$Te$_{20}$Sn$_2$ and…
A coordinated temperature behavior of magnetic susceptibility and internal friction has been observed in the La2/3Ba1/3MnO3 manganite in the temperature region of the crystal phase separation 5-340 K. Stepwise temperature behavior of the…
Ni-based superalloy Inconel-718 is ubiquitous in metal 3D printing where high cooling rate and thermal gradient are present. These manufacturing conditions are conducive to high initial dislocation density and porosity or void in the…
Tribological properties of materials play an important role in engineering applications. Up to now, a number of experimental studies have identified correlations between tribological parameters and the mechanical response. Using molecular…
The cooling dynamics of glass-embedded noble metal nanoparticles with diameters ranging from 4 to 26 nm were studied using ultrafast pump-probe spectroscopy. Measurements were performed probing away from the surface plasmon resonance of the…
Using molecular-dynamics simulation and finite-element modelling, we simulate nanoindentation into the three principal surfaces -- the (100), (110) and (111) surface -- of Cu and Al. In the elastic regime, the simulation data agree fairly…
A new experimental approach for the characterization of the lateral elastic modulus of individual nanowires is demonstrated by implementing a micro/nano scale diametrical compression test geometry, using a flat punch indenter inside of a…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite…
Coatings of ternary nanocomposite Si-C-N ceramic coatings have shown newer and improved mechanical and functional properties over the coarser and monolithic coatings. Properties like high hardness, wear resistance, oxidation resistance,…
We report the complete set of elastic constants and the bulk modulus for single crystal Pb(Mg1/3Nb2/3)O3 (PMN) at room temperature obtained from Brillouin spectroscopy and molecular dynamics (MD) simulations. The bulk modulus from Brillouin…
Combining multiple degrees of freedom in strongly-correlated materials such as transition-metal oxides would lead to fascinating magnetic and magnetocaloric features. Herein, the strain effects are used to markedly tailor the magnetic and…
Cu-Sn-Zn coatings have been widely used in industry for their unique properties, such as good conductivity, high corrosion resistance and excellent solderability. To further improve the mechanical performance of Cu-Sn-Zn coatings,…
We have investigated the plastic deformation properties of non-equiatomic single phase Zr-Nb-Ti-Ta-Hf high-entropy alloys from room temperature up to 300 {\deg}C. Uniaxial deformation tests at a constant strain rate of 10$^{-4}$ s$^{-1}$…