Related papers: Basal slip of a screw dislocations in hexagonal ti…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Plasticity in hexagonal close-packed zirconium is controlled by screw dislocations which easily glide in the prismatic planes where they are dissociated. At high enough temperatures, these dislocations can deviate out of the prism planes to…
Basal slip acts as a secondary deformation mode in hexagonal close-packed titanium and becomes one of the primary mechanisms in titanium alloyed with simple metals. As these solute elements also lead to a pronounced reduction of the energy…
Although the favored glide planes in hexagonal close-packed Zr are prismatic, screw dislocations can escape their habit plane to glide in either pyramidal or basal planes. Using abinitio calculations within the nudged elastic band method,…
Compared to cubic metals, whose primary slip mode includes twelve equivalent systems, the lower crystalline symmetry of hexagonal close-packed metals results in a reduced number of equivalent primary slips and anisotropy in plasticity,…
Plasticity in zirconium is controlled by 1/3<1-210> screw dislocations gliding in the prism planes of the hexagonal close-packed structure. This prismatic and not basal glide is observed for a given set of transition metals like zirconium…
Atomistic simulations, based either on an empirical interatomic potential or on ab initio calculations, are used to study the pyramidal glide of a 1/3 <1-210> screw dislocation in hexagonal close-packed zirconium. Generalized stacking fault…
The interaction between screw dislocations and oxygen interstitial atoms is studied with ab initio calculations in hexagonal close-packed titanium. Our calculations evidence a strong repulsion when the solute atoms are located in the…
A model based on dislocation glide controlled by the nucleation and propagation of kink pairs in a high Peierls stress crystal is revisited and modified to account for changes in dislocation densities and segment lengths with temperature…
Two different mechanisms have been reported in previous ab initio studies to describe basal slip in complex intermetallic Laves phases: synchroshear and undulating slip. To date, no clear answer has been given on which is the energetically…
Sapphire and rubies (undoped and Cr-doped $\alpha$-Al$_2$O$_3$ single crystals) have been deformed in compression at temperatures lower than those previously used in studies of dislocations in the basal slip plane (see part I). Above…
The cross-slip process of a screw $<$a$>$ dislocation from the basal to the prismatic plane in magnesium was studied using the density functional theory and the molecular dynamics calculations. An atomistic method for calculating the total…
Hexagonal close-packed (hcp) titanium exhibits a complex temperature-dependent mechanical response that is central to its use in structural applications. We employ large-scale molecular dynamics simulations to investigate the…
Slip intermittency and stress oscillations in titanium alloy Ti-7Al-O that were observed using in-situ far-field high energy X-ray diffraction microscopy (ff-HEDM) are investigated using a discrete dislocation plasticity (DDP) model. The…
Using first principles methods we calculated the entire {\gamma}-surface of the first order pyramidal planes in {\alpha}-titanium. Slip on these planes involving dislocations with c + a dislocations is one means by which {\alpha}-titanium…
The slip strength of individual slip systems at different strain rates will control the mechanical response and strongly influence the anisotropy of plastic deformation. In this work, the slip activity and strain rate sensitivity of the <a>…
Pinning interaction between a screw dislocation and a void in fcc copper is investigated by means of molecular dynamics simulation. A screw dislocation bows out to undergo depinning on the original glide plane at low temperatures, where the…
Mg represents a group of technically important hexagonal-close packed (hcp) metals whose mechanical behaviors are very different from body-centered cubic (bcc) and face-centered cubic (fcc) metals and the underlying mechanisms remain…
Dislocation pinning plays a vital role in the plastic behaviour of a crystalline solid. Here we report the first observation of the damped oscillations of a mobile dislocation after it gets pinned at an obstacle in the presence of a…
The stability of the perfect screw dislocation in silicon has been investigated using both classical potentials and first-principles calculations. Although a recent study by Koizumi et al . stated that the stable screw dislocation was…