Related papers: Numerical study of liquid flow and heat transfer i…
In this paper we carry out a numerical investigation of forced convection heat transfer from a heated elliptical cylinder in a uniform free stream with angle of inclination $\theta^{\circ}$. Numerical simulations were carried out for $10…
In this paper, we present the results of a numerical study of air-water turbulent bubbly flow in a periodic vertical square duct. The study is conducted using a novel numerical technique which leverages Volume of Fluid method for interface…
The efficient mixing of fluids is key in many applications, such as chemical reactions and nanoparticle precipitation. Detailed experimental measurements of the mixing dynamics are however difficult to obtain, and so predictive numerical…
Reynolds-averaged Navier-Stokes (RANS) turbulence models (such as k-\epsilon models) are still widely used for engineering applications because of their relatively simplicity and robustness. In fully developed plane channel flow (i.e. the…
Three dimensional simulations on the viscous folding in diverging microchannels reported by Cubaud and Mason are performed using the parallel code BLUE for multi-phase flows. The more viscous liquid L_1 is injected into the channel from the…
We present an accurate Lagrangian method based on vortex particles, level-sets, and immersed boundary methods, for animating the interplay between two fluids and rigid solids. We show that a vortex method is a good choice for simulating…
The models that are based of fractional derivatives should be highlighted among promising new models to describe turbulent fluid flows. In the present work, a steady-state flow in a duct is considered under the condition that the turbulent…
The results of computing experiments are presented for the steam and gas stream motion in converging-diverging flow element called Laval nozzle and applied in steam and gas turbines. In beginning the experiments had carried out for Laval…
Direct numerical simulations of turbulent open channel flow with friction Reynolds numbers of $Re_{\tau}=200,400,600$ are performed. Their results are compared with closed channel data in order to investigate the influence of the free…
Turbofan engine performance depends highly on the characteristics and conditions of the inlet flow. Swirl distortions, caused by non-uniformities in flows arising from boundary layer or ground/fuselage vortex ingestion are of concern and…
The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining an…
We carry out direct numerical simulation (DNS) of flow in a turbulent square duct by focusing on heat transfer effects, considering the case of unit Prandtl number. Reynolds numbers up to $Re_\tau \approx 2000$ are considered which are much…
Oscillatory flow in confined spaces is central to understanding physiological flows and rational design of synthetic periodic-actuation based micromachines. Using theory and experiments on oscillating flows generated through a laser-induced…
Multiphase flows frequently occur in many important engineering and scientific applications, but modeling of such flows is a rather challenging task due to complex interfacial dynamics between different phases, let alone if the flow is…
Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and…
The flow of viscoelastic fluids in channels and pipes remain poorly understood, particularly at low Reynolds numbers. Here, we investigate the flow of polymeric solutions in straight channels using pressure measurements and particle…
A 2D numerical hydrodynamics approach is considered for modelling recent experimental results on the oscillation and collective behavior of convective flows. Our simulations consider the rising dynamics of heated fluid columns in a…
Understanding the thermal and flow fields associated with natural convection is of great importance in the design and manufacture of passive cooling systems, solar collectors, and ventilation systems. The aim of this study is to numerically…
The effects of cell size and deformability on the lateral migration and deformation of living cells flowing through a rectangular microchannel has been numerically investigated and compared with the inertial-microfluidics data on detection…
Using the previously developed model to describe laminar/turbulent states of a viscous fluid flow, which treats the flow as a collection of coherent structures of various size (Chekmarev, Chaos, 2013, 013144), the statistical temperature of…